Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The red light should extinguish and the green light will come on when charging is complete (takes approximately 24 hours to charge a fully discharged mower). 5. It is recommended to leave the mower on constant charge for optimum performance during the mowing season. HANDLE ADJUSTMENT Your mower has a variable height handle adjustment feature. To adjust the handle position to suit your height preference, use the following procedure: 1. Remove both knobs C-1 on the middle part of the handlebars and remove the bolts C-2. 2. Slide the upper handle into one of the 3 adjustment positions C-3, aligning the holes in the upper and lower handles. 3. Insert the saddle bolts and install the knobs, tightening securely. The knobs should always be on the outside of the handles to avoid interference with the rear door and grass bag. WHEEL HEIGHT ADJUSTMENT (1-3/4” TO 3-1/2”) 1. Before making any adjustments, release bail handle to turn mower off, wait for blade to stop, and remove safety key. 2. Your mower features the Black & Decker one touch wheel height adjustment system. This system will adjust all four wheels at the same time. 3. To raise or lower the cutting height, place the palm of your hand on the palm rest D-1 and with your fingers, squeeze upward on the finger grip D-2 and hold. 4. While holding the finger grip up you can raise or lower the cutting height. The mower has seven blade height adjustment positions. Refer to the scale E-1 and pointer E-2 at the front of the mower. The pointer will indicate the height setting for cutting your lawn. This setting can be a reference for the next time you want to cut your lawn at the same height. When you have the mower at the height you would like, hold it in place with your left hand on the lower right handle bar and release the finger grip with your right hand to lock the height adjust. Note: To ensure that the deck is securely locked in one of the seven positions, press down on the palm rest after releasing the finger grip. 4 OPERATION KNOW YOUR MOWER READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR MOWER. See diagram F to familiarize yourself with the location of various controls and adjustments referenced below. Save this manual for future reference. F-1: Safety key F-2: Bail handle F-3: Switch lever F-4: Handle adjustment knobs F-5: Handle storage knobs F-6: Grassbag F-7: Cut height adjustment release F-8: Cut height indicator SAFETY KEY WARNING: SHARP MOVING BLADE. In order to prevent accidental start-up or unauthorized use of your Cordless Mower, a removeable Safety Key A-7 has been incorporated into the design of your mower. The mower will be completely disabled when the Safety Key has been removed from the mower. With the Safety Key removed, you will have access to the charger receptacle A-9 and red A-1 and green A-2 charge indication lights. NOTE: THE SAFETY KEY HAS A HOLE IN THE CENTRE TO ALLOW FOR STORAGE ON A NAIL, OUT OF THE REACH OF CHILDREN. WARNING: ROTATING BLADES CAN CAUSE SERIOUS INJURY. TO PREVENT SERIOUS INJURY, REMOVE SAFETY KEY WHEN UNATTENDED, OR WHEN CHARGING, CLEANING, SERVICING, TRANSPORTING, LIFTING, OR STORING MOWER. TO TURN MOWER ON Insert Safety Key A-7 into the housing of the motor shroud A-8 and push down, until safety key is fully seated inside housing. The mower is now operational and can be started by activating the switch system. WARNING: SHARP MOVING BLADE. NEVER ATTEMPT TO OVERRIDE THE OPERATION OF THIS SWITCH AND KEY SYSTEM SERIOUS INJURY COULD RESULT. ON-OFF SWITCH LEVER Your mower is equipped with a special on-off switch system. To operate the system, first grasp the bail handle G-1 and pull it to the handlebar G-2. Then firmly push the switch lever G-3 forward until it snaps into the “on” position. The spring-loaded “snap-action” lever will relocate itself back into its original position. To turn the mower off, just release the bail handle. Once the bail handle has returned to the original position it will activate the “Automatic Braking Mechanism”. The motor is electrically braked and the mower blade will stop rotating in 3 seconds or less. MEETS CPSC SAFETY REQUIREMENTS Black and Decker Mowers conform to the safety standards of the American National Standards Institute, and the U.S. Consumer Product Safety Commission. The Blade turns when the motor is running. ENGLISH 5 ENGLISH BATTERY GAUGE NOTE: BATTERY GAUGE IS NOT ACTIVE IN CHARGING MODE. GAUGE IS ACTIVATED ONLY WHEN MOWER IS RUNNING. Your new Black & Decker Cordless Lawnmower has a gauge to provide you with information on your battery state of charge. While operating the mower, the gauge constantly senses and displays the battery condition as follows: When the needle is pointing in the green area H-1, the battery is in a highly charged condition. When the needle is pointing in the red area H-2, the battery charge is depleted. Before using your new mower for the first time, it is recommended that the unit be charged overnight to ensure that the battery is f...