Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
For safe operation starts. Make sure the throttle is at idle position. Never place the throttle into the high speed position or half throttle position (throttle lock position) when starting the engine. 3. After starting the engine, check to make sure that the cutting attachment stops rotating when the throttle is moved fully back to its original position (idle position). If it continues to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized RedMax servicing dealer for repair. ¦ Using the product Cut only materials recommended by the manufacturer. And use only for tasks explained in the manual. 1. Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady , even posture while working. 2. Keep cutting attachment below waist level. 3. Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the level necessary. 4. If you detect abnormal vibration or noise during operation, promptly stop the product and check whether something has broken. If a breakedown has occurred, do not operate the product until the problem is fixed. 5. Keep all parts of your body away from rotating cutting attachment. 6. Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris. 7. If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around. 8. After using the product and other equipment, CLEAN UP! IMPORTANT WARNING IMPORTANT WARNING 5. For safe operation starts. Make sure the throttle is at idle position. Never place the throttle into the high speed position or half throttle position (throttle lock position) when starting the engine. 3. After starting the engine, check to make sure that the cutting attachment stops rotating when the throttle is moved fully back to its original position (idle position). If it continues to rotate even after the throttle has been moved fully back, turn off the engine and take the unit to your authorized RedMax servicing dealer for repair. ¦ Using the product Cut only materials recommended by the manufacturer. And use only for tasks explained in the manual. 1. Grip the handles firmly with both hands using your whole hand. Place your feet slightly apart (slightly further apart than the width of your shoulders) so that your weight is distributed evenly across both legs, and always be sure to maintain a steady , even posture while working. 2. Keep cutting attachment below waist level. 3. Maintain the speed of the engine at the level required to perform cutting work, and never raise the speed of the engine above the level necessary. 4. If you detect abnormal vibration or noise during operation, promptly stop the product and check whether something has broken. If a breakedown has occurred, do not operate the product until the problem is fixed. 5. Keep all parts of your body away from rotating cutting attachment. 6. Guard against hazardous situations at all times. Warn adults to keep pets and children away from the area. Be careful if you are approached. Injury may result from flying debris. 7. If someone calls out or otherwise interrupts you while working, always be sure to turn off the engine before turning around. 8. After using the product and other equipment, CLEAN UP! IMPORTANT WARNING HEZ2450S/HEZ3050S 5. For safe operation ¦ Transport 1. Drain the fuel from the fuel tank before transporting or storing the product. 2. When hand-carrying the product, cover over the cutting part, lift up the product and carry it paying attention to the blade. 3. Secure the unit carefully to prevent movement when it is transported. 4. A unit that receives a strong shock during transport and unloading may malfunction. ¦ Fuel safety 1. Always use caution when handling fuel. It is highly flammable. Wipe up all spills, screw the fuel cap back tightly, and then move the product at least 10 feet (3 meters) from the fueling point before starting the engine. 2. Eliminate all sources of sparks or flame (i.e. smoking, open flames, or work that can cause sparks) in the areas where fuel is mixed, poured, or stored. 3. Do not smoke while handling fuel or while operating the product. 4. Do not refuel a hot engine. 5. Do not refuel a running engine. 6. Keep the handles dry, clean and free of oil or fuel mixture. 7. Always store fuel in an approved container designed for that purpose. ¦ Storage 1. Always store the product and fuel so that there is no risk of leakages or fumes coming into contact with sparks or naked flames from electrical equipment, electric moters, relays/switches, boilers and the like. 2. When storing the product, the fuel t...
Эта инструкция также подходит к моделям:Газонокосилки - STICK HEZ3050S (395.4 kb)