Войти:
Оценок - 1, средний балл: 5 ( )

Инструкция по эксплуатации Alamo, модель JD-5105

Производитель: Alamo
Размер: 1.76 mb
Название файла: 027acd27-9b2b-43bf-bf31-9b6508623359.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Alamo Group is not responsible for modifications to the MountKit to accommodate these differences. ALAMO INDUSTRIAL 1502 E. Walnut Seguin, Texas 78155 210-379-1480 © 2005 Alamo Group Inc. TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sense! WARRANTY INFORMATION: Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration Form in full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on the Warranty Card and on the Warranty Form that you retain. INTRODUCTION INTRODUCTION ABOUT THIS MANUAL: The intent of this publication to provide the competent technician with the information necessary to perform the CORRECT Assembly to the Alamo Industrial Product. This will, in turn provide for complete customer satisfaction It is hoped that the information contained in this and other Manuals will provide enough detail to eliminate the need for contact of the Alamo Industrial Technical Service Dept. However, it should be understood that many instances may arrive where correspondence with the Manufacturer is necessary. CONTACTING MANUFACTURER: (Please help us Help You! Before You Call! ) Alamo Industrial Service Staff Members are dedicated to helping you solve your problem, or your customer’s service problem as quickly and efficiently as possible. Unfortunately, we receive entirely to many calls with only a minimum amount of information. In some cases, the correspondent has never gone out to look at the equipment and merely calls inquiring of the problems described to him by the operator or customer. Most calls received by Alamo Industrial Service can be classified into approx. 6 general categories. 1. Hydraulic or Mechanical Trouble Shooting. 2. Request for Technical Information or Specifications. 3. Mounting or Fitting Problem. 4. Special Service Problem. 5. Equipment Application Problems. 6. Tractor Problem Inquiries. HOW YOU CAN HELP: Make sure the call is necessary! Most of the calls received may not be necessary if the Dealer Service Technician would do the following. 1. Check the Service Information at your Dealership provided by Alamo Industrial, This would include, Service Bulletins, Information Bulletins, Parts Manuals, Operators Manuals, Assembly Manual or Service Manual, many of these are available via the Alamo Industrial Internet site (Com). Attempt to diagnose or repair problem before calling. 2. If a call to Alamo Industrial is needed, Certain Information should be available and ready for the Alamo Industrial Service Staff. Such information as, Machine Model, Serial Number, Your Dealer Name, Your Account Number and Any other information that will be useful. This information is vital for the development of a prompt and correct solution to the problem. This will also help to develop a database of problems and related solutions, which will expedite a solution to future problems of a similar nature. 3. The technician may be asked to provide detailed information about the problem including the results of any required trouble shooting techniques. If the information is not available, The technician may be asked to get the information and call back. Most recommendations for repairs will be based on the procedures listed in the Service Manual / Trouble Shooting Guide and Information provided by customer. CONTACT ALAMO INDUSTRIAL: Alamo Industrial, 1502 E. Walnut St. Seguin TX. 78155, Technical Service Dept. PH: 830-379-1480 Switch Blade (JD-5105-5205-5225-5325-5425-5525, Asy. Man) 05/05 © 2005 Alamo Group Inc. Index -1 INDEX - ASSEMBLY INSTRUCTION Page Introduction Manual Introduction............................................................................ Index-1 Section 1 - Model Specifications DO NOT DO LIST (IMPORTANT)..................................................... 1-2 Specifications.....................................................................................1-3 to 1-4 Using Torque Wrench with Adapters (Formula)................................1-5 Hose Fitting Torque Chart..................................................................1-6 Bolt Torque Chart...............................................................................1-6 Section 2 - Tractor Preparation General Information........................................................................... 2-2 to 2-6 Section 3 - Pump & Driveshaft Installation Pump & Driveshaft Schematic.......................................................... 3-2 Remove Engine Guards for Access to engine com...

Эта инструкция также подходит к моделям:
Газонокосилки - JD-5205 (1.76 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории