Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
1694561 For Baron / 2400 / RD Series Instructions 124356789101113131216151418171920151521212223 Kit Contents: 13 1708298 2 PIN, Round Head, Drilled, 3/8 x 1 Ref Part No. Qty. Description 14 1732511A 1 BRACKET, Mounting 1 1725959A 1 ROD & TUBE ASSEMBLY 15 1960074 4 CLIP, Hair Pin 2 1960033 1 CLIP, Hair Pin 16 1960585 2 CAPSCREW, Hex,5/16-18 x 1-3/4 3 1723124 1 BUTTON, Red 17 1725957 2 PAD, Rubber 4 1713995 1 GRIP, Soft, Black 18 1732510A 1 SUPPORT PLATE 5 1960674 1 PUSH NUT, 1/4 19 2157081 1 SPACER 6 1723321 1 SPRING, Compression 20 1733693 1 LIFT SHAFT ASSEMBLY 7 1725958 1 ROD, Latch 21 1919381 2 WASHER, .34 x 1 x .13 8 1721999A 1 LATCH, Lift Lever 22 1723683 2 PIN, CLEVIS 9 1960126 1 PUSH NUT, 1/4 23 1724638 1 GUARD ASSY, DEFLECTOR 10 1727441A 1 LEVER ASSEMBLY 11 1927609 1 PIN, 3/8 x 1 12 1931277 2 NUT, Hex, Flange Whiz Lock, 5/16-18 Figure 1. Contents LIFT LEVER KIT FITS ON BARON / 2400 / RD Product Serial Number Range This kit adds a lift lever for front mounted Number Requires p/n 1726404 attachments. 1694328 All 1694329 All 1694346 All WARNING 1694347 All 1694384 All Before beginning any service work turn off the 1694315 00001-00999 PTO, set the parking brake, turn off the ignition, 1694481 00001-00999 and disconnect the spark plug wire(s). 1694482 00001-00999 1694483 00001-00999 1694484 00001-00999 1694485 00001-00999 1694504 00001-00999 1 2 Installation Instructions Lift Lever Kit INSTALLATION ALL MODELS 1. Remove mower deck as described in the Operator’s Manual. 2. Remove 5/16-18 nuts (A, Figure 2) and 5/16-18 x 3/4 capscrews (B) which hold the right rear seat deck (C) to the frame(D). Discard capscrews and nuts. 3. Install bracket (E, Figure 3) using new 5/16-18 x 1- 3/4 capscrews (B) and new 5/16-18 locknuts (A). Install New Lift Shaft Assembly MODELS WITH SERIAL NUMBERS BELOW (<) 00999 1. Remove hair pin (F, Figure 5) and washer (E). 2. Remove lift rod (B) from lift shaft assembly (A). 3. Remove and discard lift shaft assembly (A). Retain hardware. 4. Mount the new lift shaft assembly (A, Figure 6) to the frame using four 5/16-18 x 3/4 carriage bolts (C) and 5/16-18 KEPS nuts (D). 5. Connect the lift rod (B) to the lift shaft assembly (A) using washer (E) and hair pin (F). Figure 2. Capscrew Removal A. Nuts, 5/16-18 C. Right Rear Seat Deck B. Capscrews, 5/16-18 x 3/4 D. Frame Figure 6. Install New Lift Shaft Assembly A. Lift Shaft Assembly D. Nut, KEPS, 5/16-18 B. Lift Rod E. Washer C. Carriage Bolts, F. Hair Pin 5/16-18 x 3/4 C C D A E F B Figure 3. Bracket installation A. Nuts, 5/16-18 (Existing) C. RIght Rear Seat Deck B. Capscrews, D. Frame 5/16-18 x 1-3/4 (New) E. Bracket A D B C A D B C E Figure 5. Remove Old Lift Shaft Assembly A. Lift Shaft Assembly D. Nut, KEPS, 5/16-18 B. Lift Rod E. Washer C. Carriage Bolts, F. Hair Pin 5/16-18 x 3/4 C C D A E F B Figure 4. Lift Lever Assembly 1726404 3 Lift Lever Kit Installation Instructions Figure 8. Install Lift lever Assembly A. Lift Lever Assembly B. Clevis Pin C. Hair Pin D. Mounting Bracket E. Spacer C ALL MODELS Install Front Attachment Lift Lever & Rod 1. Slide the lift lever assembly (A, Figure 8) on to the end of the shaft assembly and on to the edge of the tractor. 2. Secure to mounting bracket (D, Figure 8) using clevis pins (B), spacer (E), and hair pins (C). 3. Slide lift rod (A, Figure 9) into the bottom hole in the lift lever assembly (B). Secure with hair pin (C). Install front attachment & hitch as outlined in Operator’s Manual or Installation Instructions. B B A Edge of Tractor End of Shaft Assembly D Install New Lift Shaft Assembly BARON 2007 AND NEWER MODELS 1. Slide Lift Shaft Assy (A, Figure 7) into key-slotted hole (existing - attached to frame (B)) aligning key in Lift Shaft Assy (A) with key slot in hole (B). 2 Rotate the Lift Shaft Assy (C) 180 degree to the right to secure the Lift Shaft Assy in place. A B C Figure 7. Install Lift lever Assembly A. Lift Lever Assembly B. Existing hole C. Rotate Lift Lever Assembly 180 Degrees E Installation Instructions Lift Lever Kit Install Support Assembly 1. Hang support plate (A, Figure 10) onto shaft assembly (B). 2. The post on the support plate (A) fits between the clamp support (C) and hitch assembly (D). See Sub- Frame Hitch Installation Instructions for details on installing sub frame. Install Mower Deck 1. Remove Lift Lever Assembly (A, Figure 8). 2. Install mower deck as described in Operator’s Manual or Dealer Setup Instructions. Install Deflector Guard 1. Install Deflector Guard Assy (A, Figure 11) using Clevis Pins (B), Washers (C), and Hair Pins (D) as shown. MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA B Figure 9. Install Lift Rod A. Lift Rod C. Hair Pin B. Lift Lever Assembly A C B A C Figure 10. Install Support Plate A. Support Plate C. Clamp Support B. Shaft Assembly D. Hitch Assembly Figure 11. Install Support Plate A. Deflector Guard Assy C. Washer B. Clevis Pin D. Hair Pin A B CD Form No. 1726469-01 Rev. 11/2006 Briggs & St...