Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
• Do not, under any circumstance, use any attachment or accessory on this product which was not provided with the product, or identified as appropriate for use with this product in the operator’s manual. • Avoid dangerous environments. Do not use the attachment in damp or wet locations. • Do not use in rain. • Use the right attachment. Do not use attachment for any job except that for which it is intended. SAFETY RULES WHEN ATTACHMENT IS ATTACHED TO AN ELECTRIC POWER HEAD • When this attachment is being used with the recommended electric power unit, refer to Electrical Safety Rules RulesRulesRules in the electric power unit’s Operator’s Manual, in addition to items contained in this manual. • Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Keep cord clear of the working area. • Do not abuse the power cord. Never carry the product by the cord. Never yank the plug out of the receptacle. Keep the cord away from heat, oil, and sharp edges. • Inspect extension cords for deterioration, cuts, or cracks in the insulation. Repair or replace the cords if any defects appear. • Keep the extension cord clear of the working area. Position the cord so that it will not come in contact with the edger attachment when in use. Failure to do so can result in serious personal injury. • Check extension cords before each use. If damaged replace them immediately. Touching the damaged area could cause serious injury due to electrical shock. 3 SPECIFIC SAFETY RULES • Clear the work area before each use. Remove all objects such as rocks, broken glass, nails, wire, or string which can be thrown or become entangled in the edger blade. • Be sure all guards are properly and securely attached. • Replace dull or worn blade; do not attempt to sharpen. • Use this edger for edging along sidewalks, driveways, flower beds, and similar areas. Do not use for any other purpose. • Be thoroughly familiar with the controls. Know how to stop the unit and disengage the controls quickly. • Do not use the edger on or near graveled surfaces. • If the edger strikes any type of foreign object: a) Stop the edger and remove the spark plug wire or disconnect from the power supply. b) Inspect for damage to the edger attachment. c) Correct damage before using the edger attachment. Failure to do so can cause serious injury. • Make yourself familiar with the area you are edging. Be aware of uneven sidewalks and holes in the terrain as well as other similar hazardous conditions (example: wire or wire rope which can break off and become a dangerous projectile). Always push the edger attachment slowly over rough ground. • Always stop the engine and remove the spark plug wire or disconnect from power supply before attempting to remove any obstruction caught or jammed in the blade, installing attachment, or making any adjustments. • Do not attempt to remove cut material nor hold material to be cut when the engine is running or when the cutting blade is moving. • Keep hands and feet away from the cutting area. • Always keep your right hand on the rear handle and your left hand on the front handle when the blade is rotating. • A coasting blade can cause injury while it continues to spin after the engine is stopped or throttle trigger released. Maintain proper control until the blade has completely stopped rotating. • Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also to prevent misuse of the product and possible injury. 4 SYMBOLS SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service tech ni cian. For ser- vice we suggest you return the product to your nearest AU THO RIZED SERVICE CENTER for repair. When servicing, use only iden ti cal replacement parts. WARNING: WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Expand-it customer service for assistance. The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eye- glasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1. Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME EXPLANATION Safety Alert Symbol Precautions that involve your safety. Read The Operator’s Manual To reduce the risk of injury, user...