Оценок - 4, средний балл: 5
(
)
)
|
Фрагмент инструкции
1. Squeeze the two ends of the handle together. 2. Slot the ends of the handle in to the basket. 3. Lower the handle so that it slots over the frame of the basket. Cooking 1. Connect the appliance to the mains power supply. 2. Set the thermostat to the desired temperature. The amber power indicator light turns On. 3. The appliance begins to heat the oil. 4. Once the oil is at the set temperature lower the food into the oil using the basket supplied. 5. Remove the basket from the oil once the food is cooked. Shake gently above the oil pan to remove any excess oil. Note: 170°C to 180°C is suitable for general cooking. Note: The red Heat indicator light turns On during heat-up. When the oil is at the set temperatures the light turns Off. WARNING: Ensure the basket is securely located on the basket mounts. These are located towards the front of the oil pan on L370/P107/L484/L485. WARNING: The food and oil are very hot! Take care when removing the basket as oil may drip. Telephone Helpline: 0845 146 2887 (United Kingdom) Thermal Cut-Out Reset UK Buffalo Fryers are fitted with a Thermal Cut-Out safety feature. Should Reset the temperature exceed safe levels the appliance will automatically cut Switch power. To reset the appliance aftera sufficient cool-down period: 1. Unscrew the cover of the Safety Cut-Out reset switch. 2. Press the small reset switch down until it clicks, using a blunt pointed instrument. 3. The appliance is now reset and can be used as normal. Cleaning, Care & Maintenance • Always turn Off the appliance and disconnect from the power supply before cleaning. • Always allow the appliance and oil to cool before cleaning. • For best performance, BUFFALO recommend that the appliance is cleaned after each day of operation. Note: Failure to clean the appliance regularly may result in premature activation of the thermal cut-out switch. • Empty the oil to clean the appliance thoroughly. Note: L300/L301 Fryers come with a tap at the front of the appliance to drain the oil from the pan. • If the oil is to be reused then filtering it before refilling the pan will extend the oils cooking life. • Use warm, soapy water and a damp cloth to clean the exterior of the appliance. • Dry thoroughly after cleaning. • A BUFFALO dealer or qualified technician should carry out repairs if required. Telephone Helpline: 0845 146 2887 (United Kingdom) UK Troubleshooting If your BUFFALO appliance develops a fault, please check the following table before making a call to the Helpline. Fault Probable Cause Action The appliance is not working The appliance is not switched on Check the appliance is plugged in correctly and switched on Plug and lead are damaged Call BUFFALO agent or qualified technician Fuse in the plug has blown Replace the plug fuse Power supply Check power supply Internal wiring fault Call BUFFALO agent or qualified technician Thermal cut-out activated Reset thermal cut-out Safety switch not located properly Refit control/element unit Appliance does...
Эта инструкция также подходит к моделям:Фритюрницы - f/1.0L USM (2.34 mb)
Фритюрницы - f/1.0L USM (2.34 mb)
Фритюрницы - L300 (2.34 mb)
Фритюрницы - L301 (2.34 mb)