Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Sony, модель DPF-XR100

Производитель: Sony
Размер: 5.08 mb
Название файла:
Язык инструкции:
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Setting to portrait or landscape orientation You can set the photo frame to portrait or landscape orientation by rotating it without moving the stand. When the photo frame is placed vertically so that the operation buttons are located on the left, the display is also automatically rotated to the portrait orientation. The directions indicated on the direction button on the rear panel depend on the orientation of the photo frame. Notes • Check whether the stand is stable. If the stand is not set properly, the photo frame may fall over. • The Sony logo does not light up when the photo frame is placed vertically or turned off. • You can also rotate the image manually (page 38). • The photo frame does not detect and rotate the orientation of images when [Auto display orientation] of [General Settings] on the (Settings) tab is set to [OFF]. • A video file is not rotated automatically even if you change the orientation of the photo frame. Tip It is easier to turn the stand if you wind or wrap a rubber band tightly around the stand when you remove the stand from the photo frame. 12 GB Turning the photo frame on Turning the photo frame on Turning on the power Press 1 (on/standby) on the photo frame or remote control to turn on the power. The standby indicator turns to green from red. The Sony logo on the front panel lights up. Turning off the power Hold down 1 (on/standby) on the photo frame or remote control until the power turns off. The standby indicator turns to red from green. Note Do not disconnect the AC adaptor from the photo frame or the AC outlet before the standby indicator turns red. Doing so may damage the photo frame. Operations in an initial state When the photo frame is turned on without a memory card loaded or other device connected, the initial display below appears on the screen. If the photo frame is not operated for a certain period of time, the demo mode is displayed. If any other button than the power button is pressed, the screen returns to the initial display. First, press MENU during the initial display then set the date and time. Basic operations 13 GB Setting the current time Setting the current time Press MENU. 2 Press B/b to select the (Settings) tab. 3 Press v/V to select [Date/time Settings] and press . 4 Set the World clock. 1Press v/V to select [World Clock Settings] and press . 2Press v/V to select [Local Time] and press . 3Press v/V to select the region where you are living and press . 4Press v/V to select [Local DST] and press . 5Press v/V to select [ON] or [OFF] and press . 6Press BACK. You can set up to three world clocks other than the clock for your region. Proceed steps 2 to 5 to set [Clock 1 Time], [Clock 2 Time], [Clock 3 Time], and their respective day light saving times. 5 Set the date. 1Press v/V to select [Date] and press . 2Press B/b to select month, day and year, press v/V to select a value, then press . 6 Set the time. 1Press v/V to select [Time] and press . 2Press B/b to ...

Эта инструкция также подходит к моделям:
Фоторамки - DPF-VR100 (5.08 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории