Disconnect the interface cable and then configure settings. Using an Eye-Fi Card ..When [53: Wi-Fi] is set to [Enable], image transfer using an Eye-Fi card is disabled. 13 MEMO 14 2 Transferring Images Between Cameras Images can be transferred between Canon cameras via the built-in wireless LAN functions. ..Wireless connection is possible for Canon cameras with built-in wireless LAN functions marketed in 2012 or later. Note that the camera cannot be connected to Canon camcorders, even if they have built-in wireless LAN functions. ..The camera cannot be connected to Canon cameras without built-in wireless LAN functions, even if they support Eye-Fi cards. ..Still photos can be transferred only if their file format is JPEG. ..Although movies can be transferred, some target cameras may not be able to play them back depending on their functionality. 15 Selecting the Connection Destination Register the target camera to connect to via a wireless LAN. The camera can be connected to only one camera at a time. 1 Select [Wi-Fi function]. ..Under the [53] tab, set [Wi-Fi] to [Enable], then select [Wi-Fi function]. 2 Select [z]. ..Press the or key to select [z] (Transfer imgs between cameras), then press <0>. 3 Start the connection on the target camera. ..When the screen on the left is displayed on the camera, start the connection on the target camera as well. For the operation procedure, refer to the instruction manual of the target camera. ..When a connection is established, the settings are automatically saved and an image on the card is displayed. Selecting the Connection Destination 4 Select the images to send. ..Select images on the camera sending the images (p.18). ..Do not operate the camera receiving the images. Note that GPS information is not displayed on the camera’s playback screen even if GPS information is appended to the received image. Shooting locations can be viewed on a virtual map, using the Map Utility software. ..The connection settings are automatically saved/registered with the nickname of the camera to which a connection was established. ..Auto power off does not function when the camera is connected to another camera. 17 Sending Images Sending Images One by One Selected images are sent one by one. 1 Select an image to send. ..Press the key to select an image to send, then press <0>. ..You can also press the button to select an image in the index display. To return to the single-image display, press the button. 2 Select [Send img shown]. ..To select a size at which to send the image, select [Resize image] and press <0>. ..Press the key to select [Send img shown], then press <0>. • The transfer progress screen is displayed. ..To send another image, repeat steps 1 and 2. 3 Terminate connection. ..Press the button to display the confirmation screen. Press the key to select [OK], then press <0> to terminate the connection. • The [Wi-Fi function] screen will reappear. If playback or shooting operation is started during the connection, the connection will be terminated. RAW images cannot be sent. Sending Images Sending Selected Images Multiple images can be selected and sent. 1 Press <0>. 2 Select [Send selected]. ..To select a size at which to send the images, select [Resize image] and press <0>. ..Press the key to select [Send selected], then press <0>. 3 Select the images to send. ..Press the key to select the images to send, then press <0>. • is displayed on the upper left of the image to send. ..You can also press the button to select an image in the three- image display. To return to the single- image display, press the button. ..After selecting the images to send, press the button. 19 Sending Images 4 Reduce the image size. ..Set it if necessary. 5 Send the images. ..Press the key to select [Send], then press <0> to send the images. • The transfer progress screen is displayed. ..To send another image, repeat steps 1 to 5. 6 Terminate connection. ..Press the button to display the confirmation screen. Press the key to select [OK], then press <0> to terminate the connection. • The [Wi-Fi function] screen will reappear. ..If playback or shooting operation is started during the connection, the connection will be terminated. Operations such as shooting cannot be performed when data is being sent or received. When [Cancel] is selected on the camera being used to send images, image transfer is stopped so that shooting and other operations can be performed. ..When sending a large number of images or large files (total size), make sure that the battery is adequately charged so it does not run out during the process. ..RAW images cannot be sent. ..You can select up to 50 files. Reconnecting The camera can reconnect to another camera for which connection settings have been registered. 1 Select [Wi-Fi function]. ..Under the [53] tab, set [Wi-Fi] to [Enable], then select [Wi-Fi function]. 2 Select [z]. ..Select [z] (Transfer imgs between ca...
