Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Please refer to the “Instruction Manual,” and the “. Handbook” contained on the supplied CD-ROM. © 2010 Sony Corporation A-DTQ-100-12(1) s [Soft key Settings] has been added to [Setup] on the menu. This item allows you to customize the function of soft keys B and C. Soft key A Soft key C Soft key B Note • You cannot customize soft key A. Customizing soft key B Pressing soft key B will activate [Shoot. Tips] in the default setting. You can assign one of the following functions instead to use it by pressing soft key B. Shoot Mode/Shoot. Tips/PrecisionDig. Zoom/ISO/White Balance/Metering Mode/ FlashCompensation/DRO/Auto HDR/Creative Style/MF Assist 1 [Menu] t [Setup] t [Soft key B Setting] t desired function. 2GB Continued r Customizing soft key C Customizing soft key C 1 [Menu] t [Setup] t [Soft key C Setting] t [Custom]. 2 [Menu] t [Setup] t Assign a function to [Custom 1], [Custom 2], or [Custom 3]. You do not need to set functions for 1, 2, and 3 all at once. In the default setting, [Custom 1] is assigned to [ISO], [Custom 2] to [White Balance], and [Custom 3] to [DRO/Auto HDR]. Using the newly assigned function You can use the function you just assigned to soft key B or C as follows. Soft key B: 1 When the assigned function is displayed at the lower right corner of the screen, press soft key B. Soft key C: 1 When [Custom] is displayed, press soft key C. Soft key B 2 Select [Custom 1/2 /3] by pressing the Soft key C right or left side of the control wheel. Note • You can use the assigned function only in P (Program Auto), A (Aperture Priority), S (Shutter Priority), and M (Manual Exposure) shooting modes. 3GB The [Menu start] function is added to the menu. This item allows you to select whether to always display the first screen of the menu or to display the screen of the item you set the last time. 1 [Menu] t [Setup] t [Menu start] t desired setting. Top Always displays the first screen of the menu. Previous Displays the last item set. This will make it easier to quickly reset the last item you set previously. 4GB There used to be only 2 settings, [On] (2 seconds) and [Off], in the [MF Assist] function. However, you can set the duration for which the image is to be enlarged when an E-mount lens is attached. 1 [Menu] t [Setup] t [MF Assist] t desired setting. No Limit Enlarges the display until [Exit] is selected. 5 Sec Enlarges the image for 5 seconds. 2 Sec Enlarges the image for 2 seconds. Off Does not enlarge the image. Note • When an A-mount lens is attached, the display is enlarged until you select [Exit] as in the same way as [No Limit], even if you select [2 Sec] or [5 Sec]. Enlarged position of [MF Assist] is maintained With [MF Assist], previously, the image was enlarged from the center. However, the upgraded firmware maintains the position from which the image is to be enlarged until the camera is turned off in man...
Эта инструкция также подходит к моделям:Фотоаппараты - NEX-3 (241.45 kb)
Фотоаппараты - NEX-3A (241.43 kb)
Фотоаппараты - NEX-3D (241.43 kb)
Фотоаппараты - NEX-3K (241.43 kb)