Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Example: 100MSDCF Date form The folder name format is as follows: folder number + Y (the last digit)/MM/DD. Example: 10090405 (Folder name: 100, date: 04/05/2009) 130 Creating a new folder Creating a new folder . A new folder is created with a number incremented one higher than the largest number currently used, and the folder becomes the current recording folder. MENU button t 2 t [New Folder] Selecting the recording folder When a standard form folder is selected and there are two or more folders, you can select the recording folder to be used to record images. MENU button t 2 t [Select folder]t Select the desired folder Note • You cannot select the folder when you select the setting [Date form]. Formatting the memory card Note that formatting irrevocably erases all data on a memory card, including protected images. MENU button t 1 t [Format]t [OK] Notes • During the format, the access lamp lights up. Do not eject the memory card while the lamp is lit. • Format the memory card using the camera. If you format it on a computer, the memory card may not be usable with the camera, depending on the format type used. • Formatting may take several minutes depending on the memory card. Changing your setup 131 Changing the noise reduction setting Changing the noise reduction setting When you set the shutter speed to a second or longer (Long exposure shooting), noise reduction is turned on for the same duration that the shutter is open. This is to reduce the grainy noise typical in a long exposure. When noise reduction is in progress, a message appears and you cannot take another picture. Select [On] to prioritize the image quality. Select [Off] to prioritize the timing of shooting. MENU button t 2 t [Long exp.NR] t [Off] Notes • Noise reduction is not performed on continuous shooting or continuous bracketing images even when it is set to [On]. • When the exposure mode is set to AUTO or Scene Selection, you cannot turn off noise reduction. Setting the noise reduction at high ISO sensitivity settings When shooting with the ISO set at 1600 or above, the camera reduces the noise that becomes more noticeable when the camera sensitivity is high. Select [High] to prioritize the image quality. Select [Normal] to prioritize the timing of shooting. MENU button t 2 t [High ISO NR] t [Normal] Note • [Normal] is selected automatically for continuous shooting or continuous bracketing images, even when you set it to [High]. 132 Changing the function of the AEL button Changing the function of the AEL button The function of the AEL button can be selected from the following two functions: – Holding the locked exposure value by pressing the AEL button while the button is held down ([AEL hold]). – Holding the locked exposure value by pressing the AEL button until the button is pressed again ([AEL toggle]). MENU button t 1 t [AEL button] t Select the desired setting Notes • While the exposure value is locked, appears on the LCD monitor and in the viewfinder. Be careful not to reset the setting. • The “Hold” and “Toggle” settings affect the manual shift (page 68) in the manual exposure mode. 133 Changing your setup Changing other settings Changing other settings Selects the sound produced when the shutter is locked, during self-timer countdown, etc. MENU button t 2 t [Audio signals] t Select the desired setting Removing the Help Guide from the screen You can turn off the Help Guide that is displayed when you operate the camera. This is convenient when you want to perform the next operation quickly. MENU button t 1 t [Help Guide disp.] t [Off] Setting the time to turn the camera to the power save mode You can set different time intervals for the camera to switch to power save mode (Power save) for the Live View (LV) and viewfinder modes (OVF). Pressing the shutter button halfway down returns the camera to the shooting mode. MENU button t 1 t [Power Save (LV)] or [Power Save (OVF)] t Select the desired time Note • Regardless of the setting here, the camera turns to power save mode after 30 minutes when the camera is connected to a TV or the drive mode is set to (Remote Commander). Selecting the language MENU button t 1 t [ Language] t Select the language 134 Setting the LCD monitor Setting the LCD monitor The brightness of the LCD monitor is automatically adjusted to the surrounding lighting conditions using the light sensor (page 36). You can set the brightness of the LCD monitor manually. MENU button t 1 t [LCD brightness] t [Manual] t Select the desired setting Notes • When it is set to [Auto], do not cover the light sensor with your hand and so on. • When using the camera with the AC-PW10AM AC Adaptor (sold separately), the brightness of the LCD monitor is always set to the brightest setting even if you select [Auto]. Setting the displayed time of the image right after shooting (Auto review) You can check the recorded image on the LCD monitor right after the shooting. You can change the displayed time. MENU button t 1 t [Auto review] t...
Эта инструкция также подходит к моделям:Фотоаппараты - DSLR-A500 (7.36 mb)
Фотоаппараты - DSLR-A500L (7.36 mb)
Фотоаппараты - DSLR-A500Y (7.36 mb)
Фотоаппараты - DSLR-A550L (7.36 mb)