Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To delete a folder, use your computer, etc. • Up to 4,000 images can be stored in one folder. When the folder capacity is exceeded, a new folder is automatically created. • For details, see “Image file storage destinations and file names” (page 68). Using the Setup screen Memory Stick Tool For details on the operation 1 page 49 Change REC. Folder Changes the folder currently used for recording images. 1 Select [OK] with v on the control button, then press z. The folder selection screen appears. 2 Select the desired folder with b/B, and [OK] with v, then press z. To cancel changing the recording folder Select [Cancel] in step 1 or 2, then press z. • You cannot select the “100MSDCF” folder as a recording folder. • You cannot move recorded images to another folder. Memory Stick Tool For details on the operation 1 page 49 Copy Copies all images in the internal memory to a “Memory Stick Duo”. 1 Insert a “Memory Stick Duo” having sufficient free capacity. 2 Select [OK] with v on the control button, then press z. The message “All data in internal memory will be copied Ready?” appears. 3 Select [OK] with v, then press z. Copying starts. To cancel copying Select [Cancel] in step 2 or 3, then press z. • Use a fully charged battery pack. If you attempt to copy image files using a battery pack with little remaining charge, the battery pack may run out, causing copying to fail or possibly corrupting the data. • You cannot select images to copy. • The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the “Memory Stick Duo” after copying, then format the internal memory ([Format] in [Internal Memory Tool]) (page 52). • A new folder is created on the “Memory Stick Duo” and all the data will be copied to it. You cannot choose a specific folder and copy images to it. • The (Print order) marks on the images are not copied. Using the Setup screen For details on the operation 1 page 49 Setup1 1 The default settings are marked with . Beep Selects the sound produced when you operate the camera. Shutter Turns on the shutter sound when you press the shutter button. On Turns on the beep/shutter sound when you press the control button/press the shutter button. Off Turns off the beep/shutter sound. Language Selects the language to be used in the menu items, warnings, and messages. Initialize Initializes the setting to the default setting. Even if you execute this function, the images stored in the internal memory are retained. 1 Select [OK] with v on the control button, then press z. The message “Initialize all settings Ready?” appears. 2 Select [OK] with v, then press z. The settings are reset to the default setting. To cancel initializing Select [Cancel] in step 1 or 2, then press z. • Be sure not to power off the camera while initializing. For details on the operation 1 page 49 Setup2 The default settings are marked with . USB Connect Selects the USB mode to be used when connecting the camera to a computer or a PictBridge compliant printer using the dedicated USB cable. PictBridge Connects the camera to a PictBridge compliant printer (page 77). PTP When [PTP] (Picture Transfer Protocol) is set and the camera is connected to a computer, the images in the recording folder on the camera are copied to the computer (Compatible with Windows XP and Mac OS X). Mass Storage Establishes a Mass Storage connection between the camera and a computer or other USB device (page 66). Video Out Sets the video signal output according to the TV color system of the connected video equipment. The TV color systems differ depending on the country and region. To view images on a TV screen, check the TV color system of the country or region of use (page 60). NTSC Sets the video output signal to NTSC mode (e.g., for the USA, Japan). PAL Sets the video output signal to PAL mode (e.g., for Europe). Using the Setup screen Setup2 For details on the operation 1 page 49 Clock Set Sets the date and time. 1 Select [Clock Set] in the (Setup2) screen. 2 2 Select [OK] with v on the control button, then press z. 3 Select the date display format with v/V, then press z. 4 Select each item with b/B and set the numeric value with v/V, then press z. 5 Select [OK] with B, then press z. To cancel the clock setting Select [Cancel], then press z. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. Viewing images on a TV Viewing images on a TV Viewing images on a TV Viewing images on a TV You can view images on a TV by connecting the camera to a TV. The connection varies according to the type of TV the camera is connected to. Viewing images by connecting the camera to a TV with the supplied dedicated A/V cable. Turn off both the camera and the TV before connecting the camera to the TV. 1 Connect the camera to the TV with the dedicated A/V cable (supplied). 1 To audio/video input jacks VIDEO AUDIO Yellow Black Control button Dedicated A/V cable 2 To the (USB) · (Playback) button A/V OUT terminal Vie...
Эта инструкция также подходит к моделям:Фотоаппараты - DSC-S750 (3.47 mb)