Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
• Following the procedure on p. 182, touch [Select All Images] to choose it. Configure the print settings. • Touch [ OK] . Removing All Images from a Photobook Choose [Clear All Selections]. • Following the procedure on p. 182, touch [Clear All Selections] to choose it. Confirm clearing the photobook. • Touch [ OK] . Using an Eye-Fi Card ELPH 320 HS IX US 2 40 HS Still Images Movies Before using an Eye- Fi card, always confirm that local use is permitted ( p. 3). Inserting a prepared Eye- Fi card enables automatic wireless transfer of images to a computer or uploading to a photo- sharing website. Images are transferred by the Eye- Fi card. Refer to the card’s user manual or contact the manufacturer for instructions on preparing and using cards or resolving transfer problems. • When using an Eye-Fi card, keep the following points in mind. • Cards may continue to transmit radio waves even when [Eye-Fi trans.] is set to [ Disable] (p. 185). Remove the Eye- Fi card before entering hospitals, aircraft, or other areas where transmission is prohibited. • When troubleshooting image transfer issues, check the card and computer settings. For details, refer to the card’s user manual. • Poor Eye-Fi connections may cause image transfer to take a long time, and transfer may be interrupted in some cases. • Eye- Fi cards may become hot, due to their transfer functions. • Battery power will be consumed faster than in normal use. • Camera operation may become sluggish. To resolve this, try setting [Eye-Fi trans.] to [Disable] . • Eye- fi transmission is not possible when the camera is connected to a wireless LAN. Connection status of Eye- Fi cards in the camera can be checked on the shooting screen ( in regular information display mode) or playback screen ( in simple information display mode). (Gray) Not connected (Blinking white) Connecting (White) Connected (Animated) Transfer in progress Interrupted Error acquiring Eye-Fi card information (Restart the camera. Repeated display of this icon may indicate a problem with the card.) Images labeled with a icon have been transferred. Using an Eye-Fi Card • Power saving ( p. 38) on the camera is temporarily disabled during image transfer. • Choosing mode will interrupt the Eye-Fi connection. Although the Eye-Fi connection will be restored after you choose another shooting mode or enter Playback mode, the camera may transfer any movies made in mode again. Checking Connection Information Check the access point SSID used by the Eye-Fi card or the connection status, as needed. • Touch H, touch n, and then touch [Eye-Fi Settings] on the 3tab to choose it. • Touch [ Connection info] . • The connection information screen is displayed. Disabling Eye-Fi Transfer Configure the setting as follows to disable Eye- Fi transfer by the card, if necessary. Choose [Disable] in [Eye-Fi trans.]. • Touch H, touch n, and then touch [Eye-Fi Settings] on the 3tab to choose it. • Choose [ Eye- Fi trans. ], and then choose [Disable]. • [Eye-Fi Settings] is not shown unless an Eye- Fi card is in the camera with its write- protect tab in the unlocked position. For this reason, you cannot change settings for an inserted Eye- Fi card if the write- protect tab is in the locked position. 186 8 Appendix Helpful information when using the camera Troubleshooting If you think there is a problem with the camera, first check the following. If the items below do not solve your problem, contact a Canon Customer Support Help Desk. Power Nothing happens when the power button is pressed. • Confirm that you are using the correct type of battery, and that there is sufficient charge ( p. 197). • Confirm that the battery is inserted facing the correct way ( pp. 18, 20). • Confirm that the memory card/battery cover is fully closed ( p. 20). The battery is depleted quickly. • Battery performance decreases at low temperatures. Try warming the battery a little by putting it in your pocket, for example, with the terminal cover on. • If these measures do not help and the battery is still depleted soon after charging, it has reached the end of its life. Purchase a new battery. The lens is not retracted. • Confirm that the memory card cover and battery cover are fully closed ( pp. 18, 19). ELPH 53 0 H S IXU S 510 HS ELPH 32 0 H S IXU S 240 HS ELPH 53 0 H S IXU S 510 HS • Do not open the memory card cover or battery cover while the camera is on. Close the cover, turn the camera on, and then turn it off again ( pp. 18, 19). ELPH 32 0 H S IXU S 240 HS • Do not open the memory card/ battery cover while the camera is on. Close the cover, turn the camera on, and then turn it off again ( p. 20). The battery is swollen. • Battery swelling is normal and does not pose any safety concerns. However, if battery swelling prevents the battery from fitting in the camera, contact a Canon Customer Support Help Desk. Display on a TV Camera images look distorted or not displayed on a TV (p. 168). Shooting Cannot shoot. • In Playback mode ( p. 23), press ...