Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• The AF illuminator emits very bright light. Although there are no problems with safety, do not look directly into the AF illuminator emitter at close range. Grid Line With reference to the grid lines, you can easily set a subject in a horizontal/vertical position. On Displays the grid lines. Off Does not display the grid line. • The grid lines are not recorded. Settings For details on the operation 1 page 70 AF Mode Selects the auto focus operation mode. Single Automatically adjusts the focus when the shutter button is pressed and held halfway down. This mode is useful for shooting stationary subjects. Monitor Automatically adjusts the focus before the shutter button is pressed and held halfway down. This mode shortens the time needed for focusing. • Battery consumption is faster than in [Single] mode. • The AF mode is disabled when [Face Detection] is set to [On] or (Advanced Sports Shooting mode) is selected in the Scene Selection. Digital Zoom Selects the digital zoom mode. The camera enlarges the image using optical zoom (up to 15.). When the zoom scale exceeds 15., the camera uses either smart or precision digital zoom. Smart (Smart zoom) ( ) Enlarges the image digitally within the range where the image will not be distorted, according to the image size. This is not available when the image size is set to [8M] or [3:2]. • The maximum zoom scale of Smart zoom is shown in the following table. Precision (Precision digital zoom) ( ) Enlarges all image sizes up to a maximum of 30., but the image quality deteriorates. Off Does not use the digital zoom. Image size and maximum zoom scale using Smart zoom Size Maximum zoom scale 5M Approx. 18. 3M Approx. 23. VGA Approx. 76. 16:9 Approx. 25. • You cannot use the Digital Zoom when [Face Detection] is set to [On] or (Advanced Sports Shooting mode) is selected in the Scene Selection. Customizing the Settings For details on the operation 1 page 70 Conversion Lens Sets for achieving appropriate focus when attaching a conversion lens (not supplied). Attach the supplied adaptor ring, then attach a conversion lens (page 19). Tele ( ) Attaches a tele conversion lens. Wide ( ) Attaches a wide conversion lens. Off Does not attach a lens. • When using the built-in flash, the flash light may be blocked, causing the shadow to appear. • The available zoom area is limited. • The available focusing area is limited. • For details, see the operating instructions supplied with your conversion lens. Settings For details on the operation 1 page 70 Shooting Settings — Shooting Settings 2 The default settings are marked with . Flash Sync. Select the timing that the flash strobes. Front Normally, use this setting. Since the flash strobes right after the shutter is released, this allows you to get your shot closer to the time you release the shutter. Rear (REAR) Used for a moving subject, etc. Since the flash strobes right before the shutter is closed, this allows you to reflect the trail of a light or movement afterimage on a subject. On the [Rear] • When the shutter speed is too fast, the [Rear] setting effect may not be available. • When the red-eye reduction is selected, the red-eye reduction effect may not be available at slower shutter speeds. Auto Orientation When the camera is rotated to shoot a portrait image, the camera records its position change and displays the image in the portrait position. On Records the image with the correct orientation. Off Auto Orientation deactivated. Customizing the • Depending on the shooting angle of the camera, the orientation of the image may not be recorded correctly. Settings For details on the operation 1 page 70 Auto Review Displays the recorded image on the screen for approximately two seconds immediately after shooting a still image. On Use the Auto Review. Off Does not use Auto Review. • If you press the shutter button halfway down during this period, the recorded image display disappears and you can immediately shoot the next image. Expanded Focus Expands the center of the screen double in manual focus mode. On Expands double. Off Does not expand. Settings For details on the operation 1 page 70 Clock Settings Clock Settings Sets the date and time. 1 Select [ Clock Settings] from (Settings) on the HOME screen. 2 Select the date display format with v/V, then press z. 3 Select each item with b/B and set the numeric value with v/V, then press z. 4 Select [OK] with B, then press z. To cancel the clock setting Select [Cancel] in step 4, then press z. Customizing the Settings For details on the operation 1 page 70 Language Setting Language Setting Selects the language to be used to display the menu items, warnings, and messages. Viewing images on a TV Viewing images on a TV Viewing images on a TV Viewing images on a TV You can view images on a TV screen by connecting the camera to a TV. The connection varies according to the type of TV the camera is connected to. Viewing images by connecting your camera to a TV with the supplied cable for mul...
Эта инструкция также подходит к моделям:Фотоаппараты - DSC-H7 (8.96 mb)