Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
.–1 .–2 . . ...... 1….......2….......... 3….........4…........ 5….........6…...... 7…....... 8…............ 9…...... . ........../.... ... ......(.....–...) 1 .................. ......... ..............(1).(2).2.... ....../...........(2)..... ....................... /........... 2 ..............(..... .).................. ..................... ................ . ....................... ................ . ................... .......(.....–...) .................... ................... . ............ ....................... .................. ................(... .....)................ ...................... .......... . ......................... ......................... ............ . ......................... ........... . ..... ..................(.... ..)...... .......... ....................... ... .................(.... .-...)................. . ........ AF(........) / MF(........ ..)..... AF(........:........) / MF(..........:......... ..).................... ... AF..................... ...AF.................. ................MF....MF ...... .......(.......) ..............AF...MF.. ............... MF........................ .............(.....-...). AF/MF................... ..... . AF..MF.................... ..AF.....AF/MF............. .. . MF..AF................MF... .....AF.....AF/MF.......... ..... ...............(DMF) AF........(AF-A)........ AF(AF-S)................. ............DMF....... . .....DMF.......: . ............ . ........AF(AF-C)....... . AF-A......2.............. .. ........MF....... ....................... .(.).................... ...MF.................. ................... .... ...(..) DT18-135mm F3.5-5.6 SAM (SAL18135) 35mm.......*1 (mm) 27-202.5 ......11-14 ..76°-12° ......*2(m) 0.45 ......(.) 0.25 ....F22-36 ......(mm) 62 ....(......) (.:mm) 76 . 86 ..(.:g) 398 *1 ....35mm..........APS-C.... ........................ ......... *2 ......................... ..... . ......................... ................(ADI..).ADI.. ..................... . ......................... ......................... ............. ... ...(1)............(1)..... .....(1).......(1)...... ....................... ................ .............. ....................... ...... This instruction manual explains how to use lenses. Precautions common to all lenses such as notes on use are found in the separate “Precautions before using”. Be sure to read both documents before using the lens. This lens is designed for A-mount, which can be used on Sony . cameras (models equipped with APS-C sized image sensor). You cannot use on 35 mm-format cameras. Notes on use ..When carrying a camera with the lens attached, always firmly hold both the camera and the lens. ..Do not hold by any part of the lens that protrudes when zooming. ..When using this lens with an E-mount camera, attach a separately sold Mount Adaptor. Do not attach the lens directly to the E-mount camera or you may damage both. Precautions for flash use ..When using a built-in camera flash, always remove the lens hood and shoot at least 1m (3.3 feet) away from your subject. With certain combinations of lens and flash, the lens may partially block the light of the flash, resulting in a shadow at the bottom of the picture. ..When a built-in camera flash is used, the corners of the screen may appear darker at wide-angle position. Check the focal length according to the built-in flash on your camera. Vignetting When using lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. . Names of parts 1...Zooming ring 2...Zoom lock switch 3...Focusing ring 4...Lens contacts 5...Lens hood index 6...Focal-length scale 7...Focal-length index 8...Focus-mode switch 9...Mounting index . Attaching and detaching the lens To attach the lens (See illustration .–..) 1 Remove the rear and front lens caps and the camera body cap. You can attach/detach the front lens cap in two ways, (1) and (2). When you attach/detach the lens cap with the lens hood attached, use method (2). 2 Align the orange index on the lens barrel with the orange index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. ..Do not press the lens release button on the camera when mounting the lens. ..Do not mount the lens at an angle. To remove the lens (See illustration .–..) While holding down the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. . Attaching the Lens Hood It is recommended that you use a lens hood to reduce flare and ensure maximum image quality. Align the red line on the lens hood with the red line on the lens (Lens hood index), then insert the lens hood into the lens mount and rotate it clockwise until the red point on the lens hood is aligned with the red line on the lens and the lens hood clicks into place. ..Attach the lens hood precisely or it may be ineffective or appear in pictures. ..W...