Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
11 Installation and removal of the LCD hood ........................... 12 Mounting and removing the lens cap .................................. 12 Using the fiber cable adapter .............................................. 13 2. Advance Check of the Case .......................................... 14 Advance check before use .................................................. 14 3. Install the digital camera................................................ 15 Check the digital camera..................................................... 15 Open the Case .................................................................... 15 Load the digital camera ....................................................... 16 Make sure the camera is loaded properly ........................... 16 Seal the Case...................................................................... 17 Check the operation of the loaded camera ......................... 17 Perform the final checks...................................................... 18 Visual Inspection ................................................................. 18 Water Leakage Test ............................................................ 18 4. Taking Pictures Under Water ........................................ 19 Underwater shooting modes ............................................... 19 How to select the shooting scene ....................................... 20 Locking AF during underwater shooting.............................. 20 5. Handling After Shooting ................................................ 21 Wipe off any waterdrop ....................................................... 21 Take out the digital camera ................................................. 22 Wash the Case with pure water .......................................... 22 Dry the Case ....................................................................... 22 EN 6 6. Maintaining the Waterproof Function ............................. 23 Remove the O-ring...............................................................23 Remove any sand, dirt, etc. .................................................23 How to Apply Grease to the O-ring ......................................25 Install the O-ring...................................................................26 Replace consumable parts ..................................................26 7. Appendix ........................................................................ 27 Specifications .......................................................................27 EN EN 7 1. Preparations 1. Preparations Check the contents of the package. EN Check that all accessories are in the box. Contact your dealer if accessories are missing or damaged. • O-ring remover • Hand strap • Lens cap • Silica gel (1g) • Silicone grease • Case body (Check that the O-ring is installed) • Instruction manual (this manual) • LCD hood (on the body) • LCD hood strap • Optical fiber cable adapter EN 8 Names of the parts 4 56 0ab237891 EN 1 Palm grip 6 Accessory mount a O-ring 2 Diffuser 7 Front lid b Tripod seat *3 Zoom lever 8 Open/close dial *4 Shutter lever 9 Lens ring *5 ON/OFF button 0 LCD inner hood EN 9 cde f EN ghikjlm *c Arrow pad • *g OK/AFL button (*1) *h Arrow pad • *d q button (*1) During Underwater Wide-*i button/arrow pad • *e ( (REC) button Angle 1 or Underwater Macro *j E button *f INFO button/arrow pad • shooting mode, the OK button *k MENU button functions as the AF LOCK l LCD monitor window button. m Rear lid Memo: The Case operation parts marked by * corresponds to the operation parts of the digital camera. When the operation parts of the Case are operated, the corresponding functions of the digital camera will operate. For details of the functions, refer to the instruction manual for the digital camera. EN 10 Using the accesories Install the strap Install the strap on the Case body. Installation illustration Installation completed EN Hand strap ring Hand strap How to use the hand strap Pass your hand through the hand strap and adjust the length with the stop button. stop button EN 11 EN Installation and removal of the LCD hood Installation Fit the LCD hood as shown in the figure into the guides above and below the LCD monitor window one after the other. Removal Remove the LCD hood from the guides above and below the LCD monitor window one after the other by widening the LCD hood. 2121Guides Installation Removal Mounting and removing the lens cap Fit the lens cap onto the lens ring as shown in the figure. Be sure to remove the lens cap before shooting. EN 12 Using the fiber cable adapter The fiber cable adapter is required when connecting the separately available UFL-1 underwater flash to the Case using an underwater optical fiber cable (optional: PTCB-E02). How to install 1 Attach the optical fiber cable adapter to the diffuser shown in the figure below. EN 2 Put the underwater optical fiber cable plug all the way into the optical fiber cable (optional: PTCB-E02) ins...
Эта инструкция также подходит к моделям:Фотоаппараты - PT‑052 (1.62 mb)