Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
* Please note some (mobile) phone services / provider do not permit access or request an additional prefix to +800 numbers. For all not listed European Countries and in case that you can’t get connected to the above mentioned number please make use of the following CHARGED NUMBERS: +49 180 5 - 67 10 83 or +49 40 - 237 73 48 99. Our Technical Customer Support is available from 9 am to 6 pm MET (Monday to Friday). EN Authorized Distributors United Kingdom: /Eire Olympus Service Department South Africa: Tudor Photographic Olympus Imaging & Audio 4th floor, Park on Long KeyMed House 66 Long Street Stock Road Cape Town 8001 Southend-on-Sea South Africa Essex Tel: +27 (0) 21 423 4150 SS2 5QH Fax: +27 (0) 21 424 4632 United Kingdom Sales -0800 111 4777 Service -0800 111 4888 Facsimile -+44 (0)1702 445134 email -consumer@olympus.co.uk INSTRUCTION MANUAL DIGITAL CAMERA INSTRUCTION MANUAL Basic guide P.2 Review the camera part names, the basic steps for shooting and playback, and the basic operations. Table of Contents P. 26 © 2010 Printed in the Netherlands · OIME · E0462458 • Thank you for purchasing an Olympus digital camera. Before you start to use your new camera, please read these instructions carefully to enjoy optimum performance and a longer service life. Keep this manual in a safe place for future reference. • We recommend that you take test shots to get accustomed to your camera before taking important photographs. • The screen and camera illustrations shown in this manual were produced during the development stages and may differ from the actual product. • The contents in this manual are based on firmware version 1.0 for this camera. If there are addition and/or modification of functions due to firmware update for the camera, the contents will differ. For the latest information, please visit the Olympus website. Register your product on and get additional benefits from Olympus! Unpack the box contents The following items are included with the camera. If anything is missing or damaged, contact the dealer from whom you purchased the camera. Camera Body cap Strap PS-BLS1 (BLS-1) Lithium ion battery PS-BCS1 (BCS-1) USB cable AV cable Lithium ion charger (Monaural) • OLYMPUS Master 2 CD-ROM • Instruction manual • Warranty card Attaching the strap 21 Thread the strap in the direction of the arrows (1, 2). 3 Lastly, pull the strap tight making sure that it is fastened securely (3). • Attach the other end of the strap to the other eyelet in the same way. EN 3EN Preparations for shootingBasic Preparations for shootingBasic Preparing the Camera Direction indicating mark 1 Charging the battery • Charging indicator Amber light : Charging in progress Blue light : Charging complete (Charging time: Up to approximately 3 hours 30 minutes). Amber blinking: Charging error 123BLS-1 Lithium ion battery BCS-1 Lithium ion charger AC cable 2Loading the battery AC wall outlet 231 Battery/card compartment lock Battery/card compartment cover .. Direction indicating mark Unloading the battery Turn off the camera before opening or closing the battery/card compartment cover. To remove the battery, first push the battery lock knob in the direction of the arrow and then remove. Battery lock knob It is recommended to set aside a backup battery for prolonged shooting in case the battery in use drains. 3 Loading the card • Insert the SD/SDHC card (referred to as “card” in these instructions) until it locks in place. g“Card basics” (P. 127) • Turn off the camera before loading or removing the card. Contact area SD card slot Removing the card • Press the inserted card lightly and it will be ejected. • Pull out the card. • Never open the battery/card compartment cover while the card access lamp is blinking. 4 Closing the battery/card compartment cover When using the camera, be sure to close the battery/card compartment cover. • Close the cover until you hear a click. EN 5 EN Basic guide Preparations for shooting Attaching a lens to the camera 1 2 2 1 Body cap 3 3 4 1 2 Lens cap Alignment mark (Red) Lens attachment mark (Red) 2 1 Lens release button 1 Remove the body cap from the camera and the rear cap from the lens 2 Attach a lens to the camera • Do not touch internal portions of the camera. • Make sure the camera is turned off. • Do not press the lens release button. 3 Remove the lens cap (3, 4) Removing the lens from the camera While pressing the lens release button (1), rotate the lens in the direction of the arrow (2). g“Interchangeable lenses” (P. 129) • Align the lens attachment mark (red) on the camera with the alignment mark (red) on the lens, then insert the lens into the camera’s body (1). • Rotate the lens in the direction indicated by the arrow until you hear it click (2). Rear cap Lens release button 6 EN Power on Dust reduction function operation The dust reduction function is automatically activated when the camera is turned on. Ultrasonic vibrations are used to remove dust ...
Эта инструкция также подходит к моделям:Фотоаппараты - E‑P2 (5.75 mb)