Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
BATTERY EMPTY Monitor top right Error message Flashes in red . Attaching the camera strap and lens cap 1 2 4 3 5 Pull the strap tight so that it does not come loose. Attach the strap to the other eyelet in the same manner. . EN 11 Using the microSD card/ microSDHC card (sold separately) microSD card/microSDHC card (hereinafter called the microSD card) is also compatible with this camera by using the microSD Attachment. “Using a microSD Attachment” (p. 74) 1 Insert the microSD card into the attachment. Insert the card to the end. 2 Insert the microSD Attachment into the camera. Notch Contact area To remove the microSD card Do not touch the contact area of the microSD Attachment and microSD card directly. Loading the xD-Picture Card™ (sold separately) into the camera This camera allows the user to take more pictures and record longer movies using an xD.Picture Card (sold separately) than using the internal memory. “Using an xD-Picture Card” (p. 72) Be sure to press the n button to turn off the camera before inserting or removing the card. Do not insert anything other than an xD-Picture Card or the microSD Attachment into the camera. 1 2 3 Card cover Contact area Notch n button Insert the card straight in until it clicks into place. Do not touch the contact area directly. To remove the xD-Picture Card 1 2 Press in the card until it clicks and comes out slightly, and then grasp the card to pull it out. “Number of storable pictures (still pictures)/ continuous recording length (movies) in the internal memory and xD-Picture Card” (p. 73) Pull the microSD card straight out. IN OKMENUBACKGOOperationguideINOKMENUBACKGOOperationguide 456 Arrow pad and operation guide The symbols ...., KJLMdisplayed on various setting and movie playback screens indicate that the arrow pad is used. 2009.08.2612:30100-000400:14/00:34IN/ 200908261230OKXYMDTIMEMENUCANCELSETYMDOKCALENDARSET .K .L .M .J Arrow pad Operation guides displayed at the bottom of the screen indicate that the .button, obutton, zoom lever or Dbutton is used. 23SEL.IMAGEWTCAMERAMENUMENUEXITSETOKSETOK Setting the date and time The date and time set here are saved to image file names, date prints and other data. 1 Remove the lens cap, and press the nbutton to turn on the camera. .The date and time setting screen is displayed when the date and time are not set. X Y M D TIME YMD---- CANCEL MENU Date and time setting screen 2 Use 78 to select the year for [Y]. X Y M D TIME 2009YMDMENUCANCEL 3 Press : to save the setting for [Y]. X Y M D TIME 200908YMDMENUCANCEL 1 EN 4 As in steps 2 and 3, use 789: and the obutton to set [M] (month), [D] (day), [TIME] (hours and minutes) and [Y/M/D] (date order). For precise time setting, press the obutton as the time signal strikes 00 seconds. To change the date and time, make the setting from the menu. [X(Date/time)] (p. 54) To check the date and time Press the gbutton while the camera is turned off. The current time is displayed for approx. 3 seconds. Changing the display language The language for the menu and error messages displayed on the monitor/viewfinder is selectable. 1 Press the .button, and press 789: to select [E] (SETUP). SETUPMENUEXITSETOK2Press the obutton. 12345BACKUPNORMALSETUPENGLISHPWONSETUPMENUCOLORMEMORYFORMATMENUEXITSETOK 3 Use 78 to select [W] and press the obutton. 4 Use 789: to select your language and press the obutton. 5 Press the .button. EN 1 14 EN Shooting, Playback and Erasing 4 Hold the camera, and compose the shot. 12M IN 4 AUTO NORM $ Horizontal grip Vertical grip Monitor 5 Press the shutter button halfway down to focus on the subject. When the camera focuses on the subject, the exposure is locked, and the AF target mark changes to green. The camera was unable to focus if the AF target mark flashes red. Try focusing again. AUTO $ AF target mark Press halfway “Focusing” (p. 68) . . Shooting with automatic settings (h mode) This is a fully automatic mode that allows the user to take pictures by simply pressing the shutter button. Settings in the shooting menu cannot be changed in h mode. 1 Remove the lens cap. 2 Set the mode dial to h. 3 Press the n button to turn on the camera. 12M IN 4 AUTO $ NORM Monitor (standby mode screen) Number of storable still pictures (p. 73) Press the n button again to turn off the camera. 6 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. AUTO$$ ImagereviewscreenPressfullyTo view images during shooting Viewing images 1Set the mode dial to q. 1IN12M2009.08.2612:30100-0001NORMPlaybackimageNumberofframesAUTO$$ ImagereviewscreenPressfullyTo view images during shooting Viewing images 1Set the mode dial to q. 1IN12M2009.08.2612:30100-0001NORMPlaybackimageNumberofframes Pressing the qbutton enables playback of images. To return to shooting, either press the qbutton again or press the shutter button halfway down. To shoot movies “Shooting movies (A mode)” (p. 20) To turn off the camera Press the nbutton to turn off the c...
Эта инструкция также подходит к моделям:Фотоаппараты - SP‑590UZ (4.23 mb)