Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Note that the number of pictures that can be stored will differ depending on the composition of the picture (due to JPEG compression). In addition, this number may differ depending on the make of memory card, even if the capacity for the memory card is the same. Setting Internal memory (14 MB) 256 MB memory card Print size (printed at 300 dpi; cm/in.) F High(3072A) 4 70 26 . 19.5 cm / 10.4 . 7.8 in. E Normal(3072) 8 140 26 . 19.5 cm / 10.4 . 7.8 in. d Normal(2592) 11 190 22 . 16.5 cm / 8.8 . 6.6 in. e Normal(2048) 17 300 17 . 13 cm / 6.8 . 5.2 in. h PC screen(1024) 59 1,040 9 . 7 cm / 3.6 . 2.8 in. i TV screen(640) 112 1,960 5 . 4 cm / 2 . 1.6 in. * All figures are approximate. If the number of exposures remaining is 10,000 or more, the number of exposure remaining display shows [9999]. l Image Mode The image mode setting can also be applied from the scene, anti-shake, and one-touch portrait menus. Changes made to the image mode setting from any of the three menus apply to all shooting modes. Shooting, Playback, and Setup Menus 98 Shooting Options: The Shooting Menu d White Balance White balance Adjust white balance based on the light source to give pictures the most realistic colors possible. Although the default setting, [Auto], can be used under most types of lighting, you can apply the Auto DaylightDaylight IncandescentIncandescent FluorescentFluorescent White bal. presetWhite bal. preset Daylight Incandescent Fluorescent White bal. preset Exit white balance setting suited to a particular light source to achieve more accurate results. e Auto White balance automatically adjusted to suit lighting conditions. Best choice in most situations. f White bal. preset Neutral-colored object used as reference to set white balance under unusual lighting conditions. See the next page for more information. g Daylight White balance adjusted for direct sunlight. h Incandescent Use under incandescent lighting. i Fluorescent Use under most types of fluorescent lighting. j Cloudy Use when taking pictures under overcast skies. l Flash Use with the flash. At settings other than [Auto], the icon for the current setting is displayed in the monitor (c8). Shooting, Playback, and Setup Menus j Flash Mode At white-balance settings other than [Auto] or [Flash], turn the flash off (B) (c32). 99 Shooting Options: The Shooting Menu fPreset White Balance Preset white balance is used with mixed lighting or to compensate for light sources with a strong color cast (for example, to make pictures taken under a lamp with a red shade look as though they had been taken under white light). 1 Place a white or gray reference object under the lighting that will be used during shooting. 2 Use the rotary multi selector to choose White balance [White bal. preset] in the white balance menu, and press d. The camera zooms in. AutoAuto DaylightDaylight Auto Daylight IncandescentIncandescent FluorescentFluorescent White bal. preset Incandescent Fluorescent Exit Shooting, Playback, and Setup Menus 3 Choose [Measure]. To apply the most recently measured value for preset white balance, choose [Cancel] and press d. White bal. preset Exit Measure Cancel 4 Frame the reference object. White bal. preset Exit Measure Cancel Reference object frame 5 Press d. The shutter is released and the new white balance value is set. No pictures are recorded. k Note on Preset White Balance Regardless of the flash mode selected, the flash will not fire when dis pressed in step 5. Therefore, the camera cannot measure a value for preset white balance for when the flash is used. 100 Shooting Options: The Shooting Menu I Exp. +/– Exposure compensation is used to alter exposure from the value selected by the camera. Choose from values between –2.0 EV and +2.0 EV in increments of 1/3 EV. Negative values produce darker pictures, positive values brighter pictures. The icon for the current setting is displayed in the monitor (c8). Exp. +/- Exit 0.300.3 Shooting, Playback, and Setup Menus 101 Shooting Options: The Shooting Menu q Continuous Capture a fleeting expression on a portrait subject, photograph a subject that is moving unpredictably, or capture motion in a series of pictures. Focus, exposure, and white balance are fixed at the values for the first picture in each series. r Single Continuous Exit Single Continuous Multi-shot 16 Intvl timer shooting One shot is taken each time shutter-release button is pressed. q Continuous Pictures are taken continuously while the shutter-release button is pressed. When the image mode is E Normal(3072), camera takes 7 shots at about 1.4 frames per second. w Multi-shot 16 Each time shutter-release button is pressed, camera takes 16 shots at about 1.6 frames per second and arrange them in a single picture d Normal(2592) pixels as shown at right. z Intvl timer shooting Camera takes pictures automatically at specified interval (up to 1,800 frames). At settings other than [Single], the indicator for the current setting is displayed in the monitor (c8)....