Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
4 Important! • Recording images that can be loaded using Photo Loader are images saved in JPEG format and animation files saved in AVI format. Handling high-volume image data as a library Loaded image files will be managed in a folder by date, which is handled as a library. Automatically creates an HTML file in which recorded images can be searched in calendar format. An HTML file will be automatically created to allow searching of recorded images loaded manually or automatically and for viewing the contents of the library using a browser. ¦ New functions of Photo Loader 1.1 Photo Loader 1.1 includes several new functions. For details, see the “readme” file on the CD-ROM. ¦ Continuing use of Photo Loader 1.0 library Users of Photo Loader 1.0 upgrading to version 1.1 must read the “Important” file on the CD-ROM to check the procedure before starting installation. Failure to install as directed may result in not being able to view previous library management data and calendar format HTML files in Photo Loader, or losing image files loaded. 5 ¦ How to read this instruction manual Operation conventions The description assumes that a mouse is used. In this document, the buttons in dialog boxes are described as follows. [View] button [Load image] button [Edit] button [Delete] button [Copy] button [Move] button [Preferences] button [Help] button [Exit] button Display screens • Note that the display screens used in this document may differ slightly from the actual screens, but this does not mean that the contents will be different. 6 Starting Photo Loader Photo Loader must be installed on your Macintosh before starting. If not yet installed, install Photo Loader on your Macintosh. 1. Switch on your Macintosh. 2. Open the destination folder and double-click “Photo Loader 1.1E”. Photo Loader starts and the function buttons is displayed. Photo Loader function buttons 7 ¦ Checking communication status between digital camera and Photo Loader (for Serial connection) Important! • A serial connection may not be possible depending on the digital camera model. For details, refer to the digital camera's user's guide. • Before loading image data from a digital camera, check that communication between the digital camera and Photo Loader is successful using the following steps. * Connect a digital camera to your Macintosh before checking the communication status. Read the instruction manual of the digital camera for connection details. * “Serial connection” means the connection to the modem port or printer port. 1. Click the [Load image] button from the function buttons. 2. Select “Serial connection” and click [Load image in camera…] button. 8 3. Click the [Setting] button. Click the [Cancel] button to cancel the operation. • Check that the serial port on the Macintosh to which the cable is connected is the same as the serial port (modem port or printer port) displayed in the configuration dialog box. • Read the Macintosh instruction manual for details of the serial port on your Macintosh. • If the serial port connected is different from the port in the configuration dialog box, select the serial port connected. 4. Click the [Test] button. • When “The camera has been recognized.” dialog box is displayed, click the [OK] button and then click the [OK] button in the preferences dialog box. • When an error message is displayed, the digital camera is not communicating correctly with Photo Loader. See Photo Loader 1.1 Help for dealing with this. 9 Using Photo Loader This section describes how to use Photo Loader. ¦ Loading an image This sub-section describes how to load image data onto your Macintosh using Photo Loader. You can choose from “Loading images automatically” and “Loading images manually”. * Images to be loaded using Photo Loader should be image files saved in JPEG format or animation files saved in AVI format. * Connect peripheral units to your Macintosh before loading images. Read the instruction manual for the digital camera for connection details. * There are two methods of sorting images to be loaded:“Sort by recording date”and“Sort by date”. See “Library sort method” on page 39 for details. Loading an image automatically You can have a supervisory program start and load images automatically from the digital camera connected to your Macintosh by setting automatic loading. The automatic loading function only works in the following conditions. Peripheral unit connected Connection method Devices used for connection Digital camera USB connection Special USB cable * The shape of the cable may vary depending on the digital camera used. PC card adapter PC card slot • Using a CompactFlash card PC card adapter CA-10 (optional) • Using an SD memory card/ MultiMediaCard (MMC) Commercially available PC card adapter Card reader USB connection or parallel connection • Using a CompactFlash card Commercially available CF card reader/ writer • Using an SD memory card/ MultiMediaCard (MMC) Commercially available SD memory card reader/wr...