Оценок - 4, средний балл: 3.8
(
)
)
|
Фото и характеристики Casio QV-R40 |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
In the REC mode or the PLAY [MENU]. 2. Select the “ Set Up” tab, select “ File No. ” , and then press [ ]. 3. Use [ ] and [ ] to change the setting, and then press [SET]. To do this for a newly Select this setting: Store the last file number increment it, regardless files are deleted or whether memory card is replaced with one Continue Find the highest file number in the current folder and increment it Reset 117 OTHER SETTINGS Turning the Use the following procedure when you press a key 1. In the REC mode or the PLAY [MENU]. 2. Select the “ Set Up” tab, select “ Beep” , and then press [ ]. 3. Use [ ] and [ ] to change the setting, and then press [SET]. To do this: Select this setting: Turn on the key tone On Turn off the key tone Off Specifying an You can specify an image screen image, which causes screen for about two seconds power button or [ ] (REC) to turn on the camera. startup screen image does not ] (PLAY) to turn on the camera. 1. In the REC mode or the PLAY mode, [MENU]. 2. Select the “ Set Up” tab, select “ Startup” , and then press [ ]. 3. Use [ ] and [ ] to display the image you want to use as the startup image. • You can specify a snapshot image or a movie image that is two seconds (200KB) or less in length. 4. Use [ ] and [ ] to change the setting, and then press [SET]. To do this: Select this setting: Use the currently displayed image as the startup screen image On Disable the startup screen Off 118 OTHER SETTINGS IMPORTANT! • The snapshot image startup image is stored called “ startup image memory” . Only one image can be stored in startup image Selecting a new startup image that is already stored in startup Because of this, if you want to return startup image, you need to have a separate that image in the camera’s standard image memory. Note that you cannot delete an image from image memory. You can only replace it with another image. Configuring With the Power Down camera so a specific image memory appears whenever specify a snapshot or a movie To configure power down image 1. Use the USB cable to connect the camera your computer (page 135). 2. Move the image data that you want to use the power down image to the top (root) directory of the camera’s built-in Flash memory. • The file name extension will not be displayed if your computer is configured to hide file name extensions. Example: CIMG0001 • If your power down image is stored on a memory card, be sure to copy the image to built-in memory before removing the memory card from the camera. 119 OTHER SETTINGS 3. Change the name following. Snapshot Image: ENDING.Movie Image: ENDING.AVI • Input the following file name only extension) if your computer is configured name extensions. File Name: ENDING • Your camera is now configured to display a down image. The power down image will appear time you press the power button to turn off the camera. The power down image appears regardless of whether or not your camera has a memory card loaded in it. IMPORTANT! • Only a snapshot (JPEG) used as the power down • Note that the Power Down with images recorded with Down Image feature may not another type of image is specified image. • Formatting the camera’s Flash memory deletes the power down image. • When both a still image and a movie are present the power down image, only the movie is used. • Note that a power down image display operation cannot be interrupted once it starts. Because of this, you should select a relatively short movie when using a movie file as the power down image. 120 OTHER SETTINGS To disable the 1. Use the USB cable your computer. 2. Change the name of the current image from ENDING.JPG or something else, or delete the current down image from Flash memory. Using the Alarm You can configure up camera to beep and display you specify. To set an alarm 1. In the PLAY mode, press [MENU]. 2. Select the “ PLAY” tab, select “ Alarm” , and then press [ ]. 3. Use [ ] and [ ] to select the alarm whose setting you want to configure, and then press [ ]. 4. Use [ ] and [ ] to select the setting you want to change, and then use [ ] and [ ] to change the selected setting. • You can set an alarm time and configure the alarm to sound either once or at the same time everyday. You can also turn the alarm on or off. 121 OTHER SETTINGS 5. Press [DISP]. • You could press [SET] to configure the alarm 6. Use [ ] and [ ] to select the scene you to appear at the alarm time, [SET]. 7. After all the settings are the way press [SET]. • You can configure up to three alarms, named “ Alarm 1” , “ Alarm 2” , and “ Alarm 3” . Stopping the When an alarm time off, the alarm will sound stop it), and then the camera after it starts to sound, press IMPORTANT! • Note that the alarm does not sound if is reached when any one of the following exists. — While the camera is turned on — While a USB data communication operation is in progress 122 OTHER SETTINGS Setting the Clock Use the procedures Zone, and to change its IMPORTANT! • Make sure you select y...