Оценок - 3, средний балл: 4
(
)
)
|
Фото и характеристики Casio QV-2400UX |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
In this mode, the camera automatically sets the shutter speed and aperture for you in accordance with subject brightness. 1. Before turning on the camera, remove its lens cap. 2. Slide the POWER ON/ OFF switch to the right to turn on the camera. 3. Slide the REC/PLAY selector to “REC”. -A, POWER - POWER ON/OFF 5B""^DTr REC PLAY : REC mode for recording images : PLAY mode for playing back images PLAY | H REC/PLAY 4. Compose the image on the monitor screen so the point on which you want to focus is inside the Focus frame. 5. Press the shutter release button about half way and hold it there to perform auto focus. Focus frame Shutter release button ON/OFF E-48 Il BASIC IMAGE RECORDING You can find out the status of the Auto Focus operation by checking the color of the focus frame and the status of the operation lamp. Operation lamp If you see this It means this Green focus frame and green operation lamp The image is in focus. Red focus frame and red operation lamp The image is not in focus. • Take care that you do not block the lens or the sensors with your fingers as you hold the camera. 6. After confirming that the image is in focus, press the shutter release button all the way down to record the image. ^TT • Recorded images are temporarily stored in a buffer, from which they are stored to the memory card installed in the camera. You can continue to store images as long as there is space available in the buffer. • The number of images you can store in the camera depends on the storage medium and the image quality setting (page E-60) you are using. • To avoid hand movement, press the shutter release button gently. • Use of a tripod is recommended for slow shutter speeds and telephoto shots to avoid blurring of the image due to camera movement. ■ Camera Shake Indicator The O (camera shake indicator) appears on the monitor screen when the zoom slider is set to T (telephoto) or when a slow shutter speed is being used. • If the camera shake indicator O appears, use a tripod and the wired remote controller to avoid camera movement. œ MF RESIZE SHIF INFC E-49 Il BASIC IMAGE RECORDING About the REC Mode Monitor Screen • The image shown on the monitor screen in the REC mode is a simplified image for composing purposes. The actual image is recorded in accordance with the image quality setting currently selected on your camera. The image recorded on the memory card has much better resolution and detail than the REC mode monitor screen image. • Certain levels of subject brightness can cause the response of the REC mode monitor screen to slow down, which causes some static noise in the monitor screen image. About Auto Focus Auto Focus tends not to work well with the following types of subjects. If you experience problems with obtaining good results with Auto Focus, try using manual focus (page E-58). • Solid color walls or objects with little contrast • Strongly backlit objects • Polished metal or other brightly reflective objects • Venetian blinds or other horizontally repeating patterns • Multiple images that are varying distances from the camera • Subjects in poorly lit areas • Auto Focus also may not work properly when the camera is unsteady or shaking. ■ Fixed Focusing Distances • The following are the fixed focusing distances when Auto Focus is unable to focus properly. Well-lit Location : 1.5 meters minimum With Flash : Approximately 2 meters • Depending on actual conditions, a green operation indicator and focus frame do not necessarily guarantee that the image is in focus. Recording Precautions • Never open the battery compartment cover, disconnect the AC adaptor from the camera, or unplug the adaptor from the wall socket while the operation lamp is flashing green. Doing so will not only make storage of the current image impossible, it can also corrupt other image data already stored on the camera's memory card. • Never remove batteries, unplug the AC adapter, or remove the memory card while the camera is saving images. • Fluorescent lighting actually flickers at a frequency that cannot be detected by the human eye. When using the camera indoors under such lighting, you may experience some brightness or color problems with recorded images. E-50 Il BASIC IMAGE RECORDING Image Recording when the Battery is Low To protect against unexpected loss of image data, images are recorded one-by-one whenever the battery level is indicated as ™ or lower. The message “Press fa) to cancel save.” appears on the monitor screen during the save operation under this condition. As long as you do not press 0 m , the save operation continues and takes a few seconds to complete. Be sure to replace all four batteries as soon as possible after this message starts to appear. Pressing 0 'jjf while the “Press C a ) to cancel save.” is on the monitor screen cancels the image save operation. • If you have a microdrive loaded in the camera, the above message appears wheneve...