Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
If the LCD is turned off, press the LCD button to turn it on. Image Display An image of the object that is picked up by the camera’s lens appears on the LCD. The camera is designed to refresh the image on the LCD about seven times per second. Because of this, you may experience a feeling of jerkiness in the changing image if you move the camera quickly. This is normal and does not indicate malfunction. Note • The LCD image that appears in the Playback Mode is more detailed than the image produced in the Record Mode. Because of this, you should consider the Record Mode image to be a reasonable fac- simile of the image that is actually stored in memory. Displaying the Image Number The image number is a value that indicates the number of the next image that will be recorded. Up to 96 images can be stored in camera memory. 1. Enter the Record Mode. • Set the function switch to the REC position. 2. Press the DISP button. Operation 28 • The image number appears in the upper right corner of the LCD. It indicates the number of the next image that will be re- corded. The number 21, for ex- ample, indicates that there are 20 images in memory, and the next image will be number 21. • To clear the image number from the LCD, press the DISP button again. Note • Note that turning display of the image number on and off in the Record Mode also affects the display of the memory page number in the Playback Mode (page 35), and the zoom area indicator used in the zoom operation (page 40). If you turn display of the image number off in the Record Mode, for example, the memory page number will not be shown in the Playback Mode. Exposure Warning Indicators An exposure warning indicator appear on the LCD and the operation indicator lights orange whenever the light being picked up by the lens would result in under exposure or over exposure of an image. Under exposure Over exposure 25 Recording Images PLAY REC Exposure Adjustment This camera features an automatic exposure (AE) function that auto- matically changes the shutter speed in accordance with lighting. In addition, you can also manually adjust the exposure to compensate for backlighting, indirect indoor lighting, dark backgrounds, and other special conditions. To manually adjust the exposure 1. Enter the Record Mode. • Set the function switch to the REC position. 2. Use the [+] and [–] buttons to manually adjust the exposure. • Pressing [+] makes the image on the LCD brighter. Use it to adjust for dim indoor lighting and back- lighting. • Pressing [–] makes the image on the LCD darker. Use it to adjust for bright sunlight. 3. After adjusting the exposure, press the shutter button to record the image. POWER DISP MODE ON/OFF + – + + .-. .+. Operation 26 Notes • Exposure adjustment is generally expressed in terms of an expo- sure adjustment value. The exposure adjustment value is always set to zero whenever you turn on the camera. • The exposure adjustment value is changed by 0.25EV with each press of [+] or [–]. The range of the value is -2EV to +2EV. • The exposure adjustment value automatically reverts to zero when- ever the shutter button is pressed. You can manually reset the ex- posure adjustment value by using [+] and [–] to change the value back to zero, which is indicated when the + indicator disap- pears from the monitor. Changing the Aperture Setting There are two aperture settings you can use to match lighting condi- tions. Use the aperture switch to change the aperture setting. • Use the [.] (F8) setting to decrease expo- sure. This setting works best outdoors. • Use the [0] (F2.8) setting to increase ex- posure. This setting works best indoor and with back lit images. Note • Also see page 28 for information about exposure warning indica- tors. 27 Recording Images /PROTECT ZOOM DISP MODE + PLAY REC Record Mode Displays The following provides details on the images, indicators and mes- sages that appear on the LCD in the Record Mode. If the LCD is turned off, press the LCD button to turn it on. Image Display An image of the object that is picked up by the camera’s lens appears on the LCD. The camera is designed to refresh the image on the LCD about seven times per second. Because of this, you may experience a feeling of jerkiness in the changing image if you move the camera quickly. This is normal and does not indicate malfunction. Note • The LCD image that appears in the Playback Mode is more detailed than the image produced in the Record Mode. Because of this, you should consider the Record Mode image to be a reasonable fac- simile of the image that is actually stored in memory. Displaying the Image Number The image number is a value that indicates the number of the next image that will be recorded. Up to 96 images can be stored in camera memory. 1. Enter the Record Mode. • Set the function switch to the REC position. 2. Press the DISP button. Operation 28 • The image number appears in the upper right corner of the LCD. It indicates the number of the next image that ...