Оценок - 2, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• The exposure and white balance when shooting Wide Shot images are fixed at the levels measured when you half-press the shutter button at the beginning of the operation. • An error message will appear if the camera is unable to successfully record a series of images. • If you shoot a moving subject, the camera may not be able to compose the super- wide image properly. • Super-wide may not produce the desired results when shooting at close distances to the subject. • With this BEST SHOT scene, the flash setting automatically becomes ? (Flash Off). Using BEST SHOT 80 Shooting with High Speed Night Scene(High Speed Night Scene/High Speed Night Scene andPortrait) Shooting with High Speed Night Scene(High Speed Night Scene/High Speed Night Scene andPortrait) With High Speed Night Scene and High Speed Night Scene and Portrait, the camera detects automatically whether it is being hand-held or on a tripod. If the camera detects it is being hand-held, pressing the shutter button will record a series of images and combine them in a way that minimizes image blur due to low light conditions. If the camera detects it is on a tripod, it will shoot a single image using a longer exposure time (instead of shooting and combining multiple images), which results in an even clearer image. The flash is always disabled while “High Speed Night Scene” is selected. If the night scene image you are shooting includes people, use the “High Speed Night Scene and Portrait” BEST SHOT scene. The flash mode setting becomes > (Auto Flash) when shooting with “High Speed Night Scene and Portrait”. 1. In the REC mode, set the mode dial to b (BEST SHOT). 2. Press [SET]. 3. Select “High Speed Night Scene” or “High Speed Night Scene and Portrait” and then press [SET]. 4. When you are ready to shoot, press the shutter button. NOTE • When holding the camera by hand while shooting with these BEST SHOT scenes, make sure that the subjects remain as still as possible as the camera shoots the series of images. • Even when holding the camera by hand while shooting with “High Speed Night Scene and Portrait”, under certain conditions the camera may shoot only a single image instead of a series of images. • Movement while the camera is mounted on a tripod may cause the camera to erroneously judge it is being hand held. • If surroundings are extremely dark when shooting with “High Speed Night Scene” or “High Speed Night Scene and Portrait”, the camera may not be able to shoot at proper brightness due to insufficient exposure. • When shooting with these BEST SHOT scenes, the “ISO Sensitivity” setting is fixed at “AUTO”. Using BEST SHOT 81 Shooting with High Speed Anti Shake (High Speed Anti Shake) Shooting with High Speed Anti Shake (High Speed Anti Shake) When you press the shutter button while High Speed Anti Shake is enabled, the camera records multiple images and automatically combines them in a way that produces a final image with minimal blur. You can shoot with this feature to minimize the effects of camera movement when shooting with optical Anti Shake does not produce the desired results. 1. In the REC mode, set the mode dial to b (BEST SHOT). 2. Press [SET]. 3. Select “High Speed Anti Shake” and then press [SET]. 4. When you are ready to shoot, press the shutter button. NOTE • With this BEST SHOT scene, the flash setting automatically becomes ? (Flash Off). • High Speed Anti Shake may not operate properly resulting in blurred images if the camera is moved more than the allowable range or if the subject moves during shooting. • When shooting with this BEST SHOT scene, the “ISO Sensitivity” setting is fixed at “AUTO”. Using BEST SHOT 82 Shooting with Priority on Subject Faces (High Speed Best Selection) Shooting with Priority on Subject Faces (High Speed Best Selection) With High Speed Best Selection, the camera automatically shoots a series of images, and selects the best one based on facial image blur, and facial expression (whether the subject is smiling or blinking). 1. In the REC mode, set the mode dial to b (BEST SHOT). 2. Press [SET]. 3. Select “High Speed Best Selection” and then press [SET]. 4. Press the shutter button to shoot. • This will cause the message “Busy... Please wait...” to appear. Do not move the camera while this message is displayed. The recording process takes some time to complete after the message appears. NOTE • Shooting with this function causes the flash setting to change automatically to ? (Flash Off). • If one or more of the faces are blurred in all of the images that are shot, they will be blurred in the final image as well. • The following conditions may make it impossible for the camera to determine if the subject is blinking or smiling. This may result in a final image in which the subject is blinking or not smiling. – Faces that are partially or completely darkened by shadows, etc. – Hair that is hiding or near the eyes – Eye glasses – Small faces – Faces that are not looking directly at the camera • Shooting a lar...