Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Recording time Image quality Movie Playback Controls Fast forward/ fast reverse [4] [6] • Each press of either button increases the speed of the fast forward or fast reverse operation. • To return to normal playback speed, press [SET]. Play/pause [SET] 1 frame forward/ back [4] [6] • Holding down either button scrolls continuously. Volume adjustment Press [2] and then press [8] [2] • Volume can be adjusted only while movie playback is in progress. Information display on/off [8] (DISP) Zoom Press the zoom button z ([). • You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. You can zoom a movie image up to 4.5 times normal size. Stop playback [MENU] • Playback may not be possible for movies not recorded with this camera. Viewing Snapshots and Movies 71 Zooming an On-screen Image Zooming an On-screen Image 1. In the PLAY mode, use [4] and [6] to scroll through the images until the one you want is displayed. 2. Press the zoom button z ([) to zoom. You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. Press the zoom button w to unzoom the image. – If display indicators are turned on, an indicator in the lower right corner of the monitor screen shows what part of the zoomed image is currently displayed. – To exit the zoom screen, press [MENU] or [BS]. – Though the maximum image zoom factor is 8X, certain image sizes may not allow zooming up to the full 8X. Image area Current display area Zoom factor Displaying 12 Images on the Same Screen 1. In the PLAY mode, press the zoom button w Boundary (]). Use [4] and [6] to scroll, 12 images at a time. To view a particular image, use [8], [2], [4], or [6] to move the selection boundary to the image you want and then press [SET]. Viewing Snapshots and Movies 72 Viewing Snapshots and Movies on a TV Screen Viewing Snapshots and Movies on a TV Screen 1. Use the AV cable that comes with the camera to connect it to the TV. TV Yellow AV cable (bundled) USB/AV port White Audio Video VIDEO IN jack (yellow) AUDIO IN jacks (white) Making sure that the 6 mark on the camera is aligned with the 4 mark of the AV cable connector, connect the cable to the camera. • Make sure that you insert the cable connector into the USB/AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction. • Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration. 2. Turn on the TV and select its video input mode. If the TV has more than one video input, select the one where the camera is connected. 3. Press [p] (PLAY) to turn on the camera. This will cause an image to appear on the TV screen, without anything appearing on the camera’s monitor screen. • Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV cable is connected. • You also can change the aspect ratio of the screen and the video output system (page 116). Viewing Snapshots and Movies 73 4. Now you can display images and play back movies as you normally do. IMPORTANT! • Before connecting to a TV to display images, be sure to configure the camera’s [r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 115). • Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required. NOTE • Audio is monaural. • Certain TVs may cut off part of the images. • All icons and indicators that appear on the monitor screen also appear on the TV screen. You can use [8] (DISP) to change the display contents. Recording Camera Images to a DVD Recorder or Video Deck Use one of the following methods to connect the camera to the recording device using the camera’s bundled AV cable. – DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals. – Camera: USB/AV port You can play a slideshow of snapshots and movies on the camera and record it on a DVD or video tape. When recording images to an external device, use [8] (DISP) to clear all indicators from the monitor screen (page 107). For information about connecting a monitor to the recording device and about how to record, see the user documentation that comes with the recording device you are using. Viewing Snapshots and Movies 74 Other Playback Functions (PLAY) This section explains menu items that you can use to configure settings and perform other playback operations. For information about menu operations, see page 55. Playing a Slideshow on the Camera (Slideshow) Procedure [p] (PLAY) * [MENU] * PLAY Tab * Slideshow Start Starts the slideshow Time Time from the start to the end of the slideshow 1 to 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes Interval Amount of time each image remains displayed Use [4] and [6] to select a value from 1 to 30 seconds, or “MAX”. If you specify a value from 1 to 30 seconds, images change at...