Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
1. In a REC mode, press [MENU]. 2. On the “Quality” tab, select “Sharpness” and then press [..]. 3. Use [..] and [..] to select the setting you want and then press [SET]. You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp). ADVANCED SETTINGS 135 Controlling Color Saturation Controlling Color Saturation i Adjusting Image Contrast Use the following procedure to adjust the saturation of colors in your images. 1. In a REC mode, press [MENU]. 2. On the “Quality” tab, select “Saturation” and then press [..]. 3. Use [..] and [..] to select the setting you want and then press [SET]. You can specify one of five saturation settings from +2 (most saturated) to –2 (least saturated). Use the following procedure to adjust the contrast of your images. 1. In a REC mode, press [MENU]. 2. On the “Quality” tab, select “Contrast” and then press [..]. 3. Use [..] and [..] to select the setting you want and then press [SET]. You can specify one of five contrast settings from +2 (most contrast between light and dark) to –2 (least contrast between light and dark). ADVANCED SETTINGS 136 Date Stamping Snapshots Date Stamping Snapshots You can have the snapshot’s recording date only, or date and time stamped in the lower right corner of the image. 1. In a REC mode, press [MENU]. 2. On the “Set Up” tab, select “Timestamp” and then press [..]. 3. Use [..] and [..] to select the setting you want and then press [SET]. Example: December 24, 2007, 1:25 p.m. To do this: Select this setting: Display the date only (2007/12/24) Date Display the date and time (2007/ 12/24 1:25pm) Date&Time Display nothing Off IMPORTANT! • Even if you do not stamp the date and/or time with Timestamp, you can do so later using the DPOF function and the printing software function (page 214). • Once date and time information is stamped in a print, it cannot be edited or deleted. • Use the “Date Style” setting (page 199) to specify the Year/ Month/Day format of the date. • The recording date and time are determined in accordance with the camera’s clock settings (pages 11, 199) when the snapshot is recorded. • Digital zoom is not supported while date stamping is turned on. • Date stamping is not supported for the following types of images. – Some BEST SHOT images (Business cards and documents, White board, etc., Old Photo, Auto Framing) ADVANCED SETTINGS B 137 Using the On-screen Histogram to Check Exposure Using the On-screen Histogram to Check Exposure The on-screen histogram that provides a graphic representation of the current exposure of the image. You can also display the histogram in the PLAY mode for information about the exposure levels of images. Histogram 1. Press [..] (DISP) as many times as necessary to display the histogram (page 53). NOTE • You can use key customization to configure the [..] and [..] buttons so they control the EV shift setting. Then you can perform EV shift while viewing the results on the on-screen histogram (page 140). ¦ How to Use the Histogram A histogram is a graph that represents the lightness of an image in terms of the number of pixels. The vertical axis indicates the number of pixels, while the horizontal axis indicates lightness. If the histogram appears too lopsided for some reason, you can use EV shift to move it left or right in order to achieve better balance. Optimum exposure can be achieved by EV shifting so the graph is as close to the center as possible. For snapshots, you can even display individual histograms for R (red), G (green), and B (blue). These lines can be used to determine whether there is too much or too little of each of the color components in an image. ADVANCED SETTINGS 138 Example Histograms A histogram towards the left side results when the overall image is dark. A histogram that is too far to the left may result in “black out” of the dark areas of an image, as shown in the nearby image. A histogram towards the right side results when the overall image is light. A histogram that is too far to the right may result in “white out” of the light areas of an image, as shown in the nearby image. An overall well-balanced histogram results when the overall image is at optimal lightness. IMPORTANT! • A centered histogram does not necessarily guarantee optimum exposure. If you intentionally want to over expose or under expose the image, you may not want a centered histogram. • Due to the limitations of exposure compensation, you may not be able to achieve an optimum histogram configuration. • Use of the flash and certain shooting conditions can cause the histogram to indicate exposure that is different from the actual exposure of the image when it was shot. ADVANCED SETTINGS 139 Other Useful Recording Functions Other Useful Recording Functions The following functions are also available in a REC mode to help make your digital image more efficient and enjoyable. • Assign functions to the [..] and [..] keys • Display an on-screen grid for easy image composition • Review an image ...