Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
See page 59 for more information. See page 49 for more information. See page 41 for more information. Face Detection Point the camera at a person and it automatically detects the person’s face for beautiful portraits every time. First, charge the battery prior to use. First, charge the battery prior to use. Note that the battery of a newly purchased camera is not charged. Perform the steps under “To charge the battery” to bring the battery to a full charge. • Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for power. Never try to use any other type of battery. 1.Positioning the positive + and negative -terminals of the battery with those of the charger unit, load the battery into the charger unit. To charge the battery 2. Plug the charger unit into a household power outlet. About 210 minutes are required to reach full charge. The [CHARGE] lamp will go out when charging is complete. Unplug the power cord from the power outlet and then remove the battery from the charger. [CHARGE] lamp Lamp Status Description Lit Red Charging Flashing Red Abnormal ambient temperature, charger problem, or battery problem (page 123) Off Charging complete Quick Start Basics 15 Other Charging Precautions • Use the special charger (BC-81L if included with camera, BC-80L if purchased separately) to charge the special lithium ion battery (NP-80). Never use any other type of charger device. Attempting to use a different charger can result in unexpected accident. • A battery that is still warm due to normal use may not charge fully. Give the battery time to cool before charging it. • A battery discharges slightly even when it is not loaded in the camera. Because of this, it is recommended that you charge the battery immediately before you need to use it. • Charging the camera’s battery may cause interference with TV and radio reception. If this happens, plug the charger into an outlet that is further away from the TV or radio. • Actual charging time depends on current battery capacity and charging conditions. To load the battery 1. Open the battery cover. Pressing the battery cover, slide it in the direction indicated by the arrow. 1 2. Load the battery. With the EXILIM logo on the battery facing upwards (in the direction of the monitor screen), hold the stopper next to the battery in the direction indicated by the arrow as you slide the battery into the camera. Press the battery in until the stopper secures it in place. Stopper Battery contacts EXILIM logo Front Back Quick Start Basics 16 3. Close the battery cover. Pressing the battery cover against the camera, slide it closed. • For information about how to replace the battery, see page 123. 12 Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below. Remaining Power High Low Battery Indicator * * * Indicator Color Cyan * Amber * Red * Red indicates battery power is low. Charge the battery as soon as possible. Recording is not possible when is indicated. Charge the battery immediately. • The level shown by the battery indicator may change when you switch between the REC mode and PLAY mode. • The camera date and time display will not be correct if the camera is left for about two days with no power supplied while the battery is dead. If this happens, load new battery and then set the correct time and date (page 108). • See page 141 for information about battery life and memory capacity. Battery Power Conservation Tips • When you do not need to use the flash, select ? (flash off) for the flash setting (page 34). • Enable the Auto Power Off and the Sleep features to protect against wasting battery power when you forget to turn off the camera (pages 110, 110). Quick Start Basics 17 Configuring Basic Settings the First Time You Turn On theCamera Configuring Basic Settings the First Time You Turn On theCamera The first time you load a battery into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images. IMPORTANT! • A screen for language selection will not appear in step 2 of the procedure below if you purchased a camera intended for the Japanese market. To change the display language from Japanese in this case, use the procedure under “Specifying the Display Language (Language)” (page 109). Note that a version of this manual in the language you select may not be included with a camera intended for the Japanese market. • Camera models sold in certain geographic areas may not support display language selection. [SET] [ON/OFF] (Power) 1. Press [ON/OFF] (Power) to turn on the camera. 2. Use [8], [2], [4], and [6] to select the language you want and then [BS] press [SET]. 3. Use [8] and [2] to select a date style and then press [SET]. Example: July, 10, 2012 YY/MM/DD * 12/7/10 DD/MM/YY * 10/7/12 MM/DD/YY * 7/10/12 4. Set the date a...