Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• Auto Shutter cannot be used in combination with any of the following features. – Premium Auto – Some BEST SHOT scenes • The following function is disabled when shooting with Auto Shutter. – Triple Self-timer Advanced Settings 73 ProcedureShooting with Face Detection (Face Detection) ProcedureShooting with Face Detection (Face Detection) [r] (REC) * [MENU] * REC Tab * Face Detection For details, see the Control Panel procedure on page 46. ProcedureShooting with Continuous Auto Focus (Continuous AF) [r] (REC) * [MENU] * REC Tab * Continuous AF When shooting a snapshot while “On” is selected for Continuous AF, Auto Focus is performed and focusing is continually updated until you half-press the shutter button. • Before you half-press the shutter button, the camera focuses at the center of the screen. If “Face Detection” is turned on when you half-press the shutter button, focusing is performed in the area where a face is detected. • Shooting with Continuous AF can cause vibration and noise to occur due to lens operation. This does not indicate malfunction. Reducing the Effects of Camera and Subject Movement (Anti Shake) Procedure [r] (REC) * [MENU] * REC Tab * Anti Shake You can turn on the camera’s Anti Shake feature to reduce image blur due to subject movement or camera movement when shooting a moving subject using telephoto, when shooting a fast-moving subject, or when shooting under dim lighting conditions. Your digital camera is equipped with a CCD shift type camera shake correction feature and a high-sensitivity anti image blur feature. These two features work in concert to minimize the effects of hand and subject movement. OnA Minimizes the effects of hand and subject movement. Off Turns off Anti Shake settings DEMOF Half-pressing the shutter button demonstrates the effect of Anti Shake. However, the image is not recorded. Advanced Settings 74 NOTE • Only Camera Stabilizer can be used during movie recording. • ISO sensitivity, aperture, and shutter speed do not appear on the monitor screen when you half-press the shutter button while “On” is selected. These values will appear briefly, however, in the preview image that is displayed immediately after you shoot a snapshot. • Shooting while “On” is selected can cause an image to appear somewhat coarser than normal and can cause slight deterioration of image resolution. • Anti Shake may not be able to eliminate the effects of camera or subject movement when movement is severe. • Anti Shake may not work properly when the camera is mounted on a tripod. Turn off Anti Shake. ProcedureSpecifying the Auto Focus Area (AF Area) [r] (REC) * [MENU] * REC Tab * AF Area For details, see the Control Panel procedure on page 42. ProcedureUsing the Auto Focus Assist Light (AF Assist Light) [r] (REC) * [MENU] * REC Tab * AF Assist Light Half-pressing the shutter button while this setting is selected Front lamp causes the front lamp to light, which provides illumination for focusing in areas where lighting is dim. Leaving this function turned off is recommended when shooting portraits from short distances, etc. IMPORTANT! • Never look directly into the front lamp while it is lit. ProcedureTurning Digital Zoom On or Off (Digital Zoom) [r] (REC) * [MENU] * REC Tab * Digital Zoom You can use this setting to turn digital zoom on or off. When digital zoom is turned off, operating the zoom controller zooms the image with optical zoom only. Advanced Settings 75 ProcedureDisplaying the On-screen Grid (Grid) ProcedureDisplaying the On-screen Grid (Grid) [r] (REC) * [MENU] * REC Tab * Grid The on-screen grid can be displayed on the REC mode monitor screen for easy vertical and horizontal alignment when composing images. ProcedureTurning on Image Review (Review) [r] (REC) * [MENU] * REC Tab * Review While Review is turned on, the camera will display an image for about one second immediately after you press the shutter button to record it. ProcedureUsing Icon Help (Icon Help) [r] (REC) * [MENU] * REC Tab * Icon Help While Icon Help is turned on, a textual description will appear on the display for certain icons when you switch between REC functions. Functions Supported by Icon Help • REC Mode, Flash, Metering Mode, White Balance, Self-timer, EV Shift Advanced Settings 76 ProcedureConfiguring Power On Default Settings (Memory) ProcedureConfiguring Power On Default Settings (Memory) [r] (REC) * [MENU] * REC Tab * Memory When you turn off the camera, it remembers the current settings of all enabled memory items and restores them when you turn it back on. Any memory item that is disabled will be returned to its initial default setting whenever you turn off the camera. Setting Disabled (Initial Default Setting) Enabled Effect Off Setting at power off Auto Shutter Off Flash Auto Focus AF (Auto Focus) White Balance Auto ISO Auto EV Shift Off AF Area Spot Metering Multi CS Off Self-timer Off Flash Intensity 0 Single SR Quality Off Single SR Zoom On Digital Zoom On MF Position Position before m...