Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Center Weighted N Center weighted metering concentrates on the center of the focus area to measure light. This type of metering is best when you want some level of control over contrast. Spot. Spot metering takes readings at a very small area. Use this metering method when you want exposure to be set according to the brightness of a particular subject, without being affected by surrounding conditions. Optimizing Image Brightness (Lighting) Procedure [r] (REC) * [MENU] * Quality Tab * Lighting You can use this setting to optimize the balance between bright areas and dark areas when shooting images. On Performs brightness correction. Off Does not perform brightness correction. Advanced Settings 106 ProcedureSpecifying Flash Intensity (Flash Intensity) ProcedureSpecifying Flash Intensity (Flash Intensity) [r] (REC) * [MENU] * Quality Tab * Flash Intensity You can specify flash intensity to one of five levels from +2 (brightest flash) to –2 (least bright flash). • Flash intensity may not change when the subject is too far away or too close. ProcedureUsing Built-in Color Filters (Color Filter) [r] (REC) * [MENU] * Quality Tab * Color Filter Settings: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, and Purple ProcedureControlling Image Sharpness (Sharpness) [r] (REC) * [MENU] * Quality Tab * Sharpness You can specify one of five sharpness settings from +2 (sharpest) to –2 (least sharp). ProcedureControlling Color Saturation (Saturation) [r] (REC) * [MENU] * Quality Tab * Saturation You can specify one of five saturation settings from +2 (most saturated) to –2 (least saturated). ProcedureAdjusting Image Contrast (Contrast) [r] (REC) * [MENU] * Quality Tab * Contrast You can specify one of five contrast settings from +2 (most contrast between light and dark) to –2 (least contrast between light and dark). Advanced Settings 107 Viewing Snapshots and Movies Viewing Snapshots See page 28 for the procedure for viewing snapshots. Viewing a Movie 1. Press [p] (PLAY) and then use [4] and [6] to display the movie you want to view. 2. Press [SET] to start playback. Movie icon: » Recording time Image quality Movie Playback Controls Fast forward/fast reverse [4] [6] (Playback in progress.) • Each press of either button increases the speed of the fast forward or fast reverse operation. • To return to normal playback speed, press [2]. Play/pause [SET] 1 frame forward/ back [4] [6] (Playback paused.) • Holding down either button scrolls continuously. Volume adjustment Press [2] and then press [8] [2] • Volume can be adjusted only while movie playback is in progress. Information display on/off [8] (DISP) Zoom Slide the zoom controller in the direction of z ([). • You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. You can zoom a movie image up to 4.5 times normal size. Stop playback [MENU] • Playback may not be possible for movies not recorded with this camera. Viewing Snapshots and Movies 108 Viewing Continuous Shutter Images Viewing Continuous Shutter Images Each time you perform a continuous shutter (CS) operation, the camera creates a CS group that includes all of the images for that particular CS session. You can use the following procedure to play back the images in a particular CS group. 1. Press [p] (PLAY) and then use [4] and [6] to display the CS group whose images you want to view. Number of image files in CS group icon the CS group First image in the CS group 2. About one second after you select a CS group, high speed playback of its images will start automatically. • After playback of a CS Group is complete, the first image of the group will be displayed on the monitor screen. • Pressing [SET] will pause playback. While playback is paused, you can adjust the playback speed, specify the playback direction, scroll forward or back, zoom images, and delete images. Current image number/number of images in the group CS speed Playback guide Viewing Snapshots and Movies 109 The following are operations that are supported after you press [SET] to start image playback. [4] [6] During playback, changes the playback direction and playback speed. While playback is paused, scrolls forward or back. • Playback speed cannot be adjusted while the displayed image is zoomed. [SET] Toggles between pause and play. Zoom controller Zooms the image. • You can use [8], [2], [4], and [6] to scroll the zoomed image on the monitor screen. • Sliding the zoom controller towards z ([) while an image is not zoomed will display a menu of images in the current CS group. [MENU] Exits CS group playback. [8] (DISP) Cycles through information display formats. [2] Displays the “CS Frame Edit” menu. NOTE • Multiple images shot using normal-speed continuous shutter are stored individually and are not grouped. This means they can be displayed individually (page 28) but not as a CS group. Deleting Continuous Shutter Images You can use the following procedures to delete images while playback is in progress or paused. . Deleting ...