Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Lock 2. Load the batteries. Be sure to keep all four batteries together as a set at all times, for both charging and powering the camera. Mixing batteries from different sets can shorten overall battery life and cause malfunction of the camera. Quick Start Basics B 12 3. Close the battery cover. • For information about how to replace the batteries, see page 146. IMPORTANT! • Before using the camera, you must specify the type of battery type (alkaline, Ni-MH) you are using. Specifying the wrong battery type setting will shorten the life of the batteries you are using. Make sure you specify the battery type setting correctly (page 15) whenever you change from one battery type to another. About rechargeable batteries Use only the rechargeable Ni-MH batteries that are specifically recommended for this camera. Proper camera operation is not guaranteed when other rechargeable batteries are used. IMPORTANT! • Batteries cannot be charged while they are loaded in the camera. Quick Start Basics 13 Checking Remaining Battery Power As battery power is consumed, a battery indicator on the monitor screen indicates remaining power as shown below. Remaining Power High Low Battery Indicator * * * Indicator Color Cyan * Amber * Red * Red The flash will take longer than normal to charge if it is being used when the battery level indicator is showing or while “Alkaline” is selected for the “Battery Type” setting (page 15). indicates that the flash is disabled. Replace batteries as soon as possible. • The level shown by the battery indicator may change when you switch between the REC mode and PLAY mode. • Leaving the camera for about one day with no power supplied while the batteries are dead will cause its date and time settings to be cleared. You will have to re-configure the settings after power is restored. • See page 174 for information about battery life and memory capacity. • Certain camera operating conditions and battery can cause the battery level indicator to indicate the battery level incorrectly. In this case, the camera may suddenly shut down without retracting the lens. If this happens, replace or charge the batteries and configure the correct “Battery Type” setting. Battery Power Conservation Tips • When you do not need to use the flash, select ? (flash off) for the flash setting (page 35). • Enable the Auto Power Off and the Sleep features to protect against wasting battery power when you forget to turn off the camera (pages 131, 131). • Select “Off” for “Continuous AF” (page 81). • Turn off the LCD monitor screen and use the viewfinder (page 136). • Avoid unnecessary optical zoom operations. Quick Start Basics 14 Specifying the Battery Type Specifying the Battery Type Your camera is designed to optimize its operation in accordance with the type of batteries you are using to power it. Specifying the wrong battery type, can cause power to turn off without retracting the lens and incorrect indication of remaining battery power. Proper operation of the camera is not guaranteed when the wrong battery type is specified. 1. Press [ON/OFF] to turn on the camera. 2. Press [MENU]. 3. Use [4] and [6] to select the “Set Up” tab. 4. Use [8] and [2] to select “Battery Type” and then press [6]. 5. Use [8] and [2] to select the type of battery you are using, and then press [SET]. Alkaline AA-size alkaline (LR6) Ni-MH AA-size rechargeable Ni-MH (nickel metal hydride) (HR6) Configuring the Display Language the First Time You Turn On the Camera The first time you load batteries into the camera, a screen appears for configuring the display language, date, and time settings. Failure to set the date and time correctly will cause the wrong date and time data to be recorded with images. 1. Press [ON/OFF] to turn on the camera. ..4....8....2....6.. [SET] [ON/OFF] (Power) Quick Start Basics 15 2. Use [8], [2], [4], and [6] to select the language you want and then press [SET]. 3. Use [8], [2], [4], and [6] to select the area where you will be using the camera and then press [SET]. The selected area is highlighted in red. 4. Use [8] and [2] to select the city where you will be using the camera and then press [SET]. 5. Use [8] and [2] to select the summer time (DST) setting you want and then press [SET]. 6. Use [8] and [2] to select a date style and then press [SET]. Example: 19. 12. 09 YY/MM/DD * 09/12/19 DD/MM/YY * 19/12/09 MM/DD/YY * 12/19/09 7. Set the date and the time. Use [4] and [6] to select the setting you want to change and then use [8] and [2] to change it. To switch between 12-hour and 24-hour format, press [BS]. 8. Press [SET]. • If you make a mistake, you can change the settings later (pages 129, 130). NOTE • Each country controls its local time offset and the use of summer time, and so they are subject to change. Quick Start Basics 16 Preparing a Memory Card Preparing a Memory Card Though the camera has built-in memory that can be used to store images and movies, you probably will want to purchase a commercially available ...