Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
• With this REC mode, the LED light setting automatically becomes off. Using Motion Shutter to Trigger a Self-timer Operation (Motion Shutter) With Motion Shutter the camera automatically triggers a self-timer countdown whenever it detects subject movement within a framed area you specify on the monitor screen. This means you can control operation of the self-timer from a distance by waving your hand, so you can include yourself in the image being shot. 1. In the REC mode, touch the recording mode icon (page 29). 2. Touch “l” (Motion Shutter). 3. Drag “ ” to the location in the image where you want movement to be detected. 4. When everything is ready, press the shutter button all the way down. Motion Shutter will go into standby to wait for trigger movement. 5. Facing the camera, move your hand or perform some other movement in the area of the icon you positioned in step 3. When the camera detects subject movement within the framed area, it will automatically start a self-timer countdown. The camera will shoot an image when the countdown reaches zero, and then go back into Motion Shutter standby to wait for the next trigger movement. NOTE • The trigger time of the Motion Shutter self-timer is fixed at two seconds. • Motion Shutter exits standby automatically after it shoots six images. • To cancel Motion Shutter standby at any time, press the shutter button. • Motion Shutter may not operate properly when there is little difference in the color of the subject and the color of the background enclosed by the boundary, or when the subject is located far away from the camera, making it too small. Recording Images B 40 Shooting with Zoom Shooting with Zoom Your camera is equipped with various types of zoom: HD Zoom, SR Zoom, and digital zoom. The maximum zoom factor depends on the image size setting. HD Zoom Allows greater zoom capabilities by cutting out a portion of the original image and enlarging it. SR Zoom Applies super resolution technology to suppress image deterioration. Digital zoom Digitally processes the center of the image to enlarge it. 1. In the REC mode, touch the “+” or “–” mark on the top of the zoom bar to zoom. + (Telephoto): Enlarges the subject and narrows the range. – (Wide Angle): Reduces the size of the subject and broadens the range. Zoom bar + – 2. Press the shutter button to shoot the image. NOTE • Telephoto images are prone to blurring caused by camera movement when you press the shutter button. Because of this, stabilizing the camera by placing it on a level surface, etc. is recommended. • Zoom operations are disabled during high speed movie recording. Perform the zoom operation before you touch “b” (Movie) to start recording. • Zoom operations are not supporting during Slide Panorama shooting. The zoom setting is fixed at full wide angle. •“U” is displayed on the monitor screen while digital zoom is being used. Recording Images 41 . Zoom Factor • The image deterioration point depends on the image size (page 55) and recording mode (page 36). The smaller the image size, the higher the zoom factor you can use before reaching the image deterioration point. Auto, Premium Auto, Motion Shutter Image Size Undeteriorated Zoom Limit Maximum Zoom Factor 12M 1.5X 4.0X 3:2 1.5X 4.0X 5M 2.3X 6.2X VGA 9.4X 15.9X BEST SHOT (Multi SR Zoom) Image Size Undeteriorated Zoom Limit Maximum Zoom Factor 10M 2.0X 4.0X 5M 2.9X 5.7X VGA 11.4X 15.9X HDR Art, BEST SHOT (excluding Multi SR Zoom) Image Size Undeteriorated Zoom Limit Maximum Zoom Factor 10M 1.0X 4.0X 5M 1.4X 5.7X VGA 5.7X 15.9X Recording Images 42 Shooting a Self portrait Shooting a Self portrait You can configure the camera so the monitor screen and lens are facing in the same direction. This means you can shoot with the self-timer as you compose the self-portrait on the monitor screen. • When using the self-timer to shoot a self-portrait, select “Auto” or “Premium Auto” for the recording mode. 1.Rotate the monitor screen panel so the screen is facing in the same direction as the lens (page 13). 2.Select “Auto” or “Premium Auto” for the recording mode (page 29). 3. Drag “r” (Self-timer) downwards to specify the self-timer countdown duration. The camera will shoot an image when the countdown reaches zero. • You can set a self-timer countdown duration within the range of two to ten seconds. The further you drag, the longer the duration. • To cancel an ongoing countdown, touch anywhere on the screen except where the self-timer icon is displayed. • Pressing the shutter button during an ongoing countdown will cancel the countdown and shoot an image. “r” (Self-timer) Recording Images B 43 To record a movie To record a movie The following procedure explains how to record a movie. “MENU” • You can record a movie while one of the following recording modes is selected. –Auto – Premium Auto – BEST SHOT (High Speed Night Scene) 1. In the REC mode, touch “MENU”. • If “MENU” is not displayed on the screen, touch the tab to display it. 2. Drag upwards and downwa...