Оценок - 3, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
162 – 165). Switching the Focus Setting The camera focuses on whatever it is aimed at even when the shutter button is not pressed. However, you can set it so that the camera only focuses when the shutter button is pressed halfway. . Choose [Continuous AF], then press the qr buttons to choose [Off]. Since the camera focuses continuously until you press the shutter button On halfway, it allows you to shoot without missing photo opportunities. The camera does not focus Off continuously, thereby conserving battery power. Turning off the AF Assist Beam The lamp will automatically light to assist focusing in low light conditions when you press the shutter button halfway. You can turn off the lamp. . Choose [AF-assist Beam], then press the qr buttons to choose [Off]. Changing Shooting Function Settings Turning Off the Red-Eye Reduction Function The red-eye reduction lamp lights in order to reduce the red-eye effect that occurs when shooting in dark conditions with the flash. You can turn off this function. . Choose [Flash Settings], then press the m button. . Press the opbuttons or turn the A dial to choose [Red-Eye Lamp], then press the qr buttons to choose [Off]. Changing the Image Display Time Right After Shooting You can change the length of time the images display right after shooting. . Choose [Review], then press the qr buttons to choose an option. 2 – 10 sec. Displays images for the set time. Hold The image displays until you press the shutter button halfway. Off Images will not display. 147 Changing Shooting Function Settings Changing the Way the Image Displays Right After Shooting You can change the way the image displays right after shooting. . Choose [Review Info], then press the qr buttons to choose an option. Off Displays the image only. Detailed Displays detailed information (p. 161). Focus Check The area inside the AF frame is magnified, allowing you to check the focus. The procedure is the same as in “Checking the Focus” (p. 114). Displaying the Overlay You can display gridlines for vertical and horizontal guidance, or a 3:2 guide to confirm the printable area for postcard size prints. . Choose [Disp. Overlay], then press the qr buttons to choose an option. Grid Lines A grid overlays the screen. 3:2 Guide Gray bars appear on the top and bottom of the screen. This area will not print when printing on paper with a 3:2 aspect ratio. Both Both grid lines, and the 3:2 guide appear. • In , you cannot set [3:2 Guide] or [Both]. • Grid Lines will not be recorded on the image. • The gray areas displayed with [3:2 Guide] are the areas that will not be printed. The actual image recorded will include the portion in the gray areas. 148 Changing Playback Function Settings Changing the IS-Mode Settings . Choose [IS Mode], then press the qr buttons to choose an option. Continuous Image stabilization is always on. You can confirm the effects directly on the display, which makes it easier to check the composition or focus. Shoot Only Image stabilization is only active at the moment of shooting. Panning Image stabilization only counters up and down motion. This option is recommended for shooting objects moving horizontally. • If camera shake is too strong, attach the camera to a tripod. You should also set the IS Mode to [Off] when the camera is attached to a tripod. • When using [Panning], hold the camera horizontally to shoot. Image stabilization does not work when the camera is held vertically. Changing Playback Function Settings You can adjust the settings in the 1tab by pressing the 1 button (p. 45). Choosing the Image that First Displays in Playback . Choose [Resume], then press the qr buttons to choose an option. Resumes with the image last Last seen viewed. Resumes with the most Last shot recently shot image. 149 150 10 Useful Information This chapter introduces how to change the date/time battery, the use of the AC adapter kit (sold separately), troubleshooting tips, and contains lists of functions and items that appear on the screen. 151 Replacing the Date/Time Battery The life of the date/time battery (back-up battery) is approximately 7 years. If the Date/Time settings screen appears every time the camera is turned on, replace the date/time battery with a new one (CR1220). Turn off the camera. Remove the date/time battery holder. Replace the battery. . Insert the battery with (+) and (-) sides oriented correctly. Insert the battery holder. Turn on the camera and set the date/time (p. 18). Using Household Power If you use AC Adapter Kit ACK800 (sold separately), you can use the camera without worrying about how much charge is left in the batteries. Turn off the camera. Plug the cord into the camera. . Open the cover and fully insert the plug into the camera. Connect the power cord. . Connect the power cord to the compact power adapter, then plug the other end into a power outlet. . Turn the camera on to use it. . After you finish, turn off the camera and unplug the power cord from the power outlet. Do not...