Оценок - 3, средний балл: 3.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
. If this tab is in the locked position, [Card locked!] will appear on the screen and you will not be able to take or erase images. 17 Opening the LCD Monitor You can use the LCD monitor to compose pictures before shooting, operate menus or play back images. Approx. 170° Approx. 90° Approx. 180° Open the LCD Monitor. Rotate the LCD monitor. . Rotate it 180° toward the lens (turn the top edge of the LCD monitor away from you). • The displayed image is automatically flipped and reversed (Reverse Display function). . The LCD monitor can be used in various positions. Close the LCD Monitor. . Close the LCD monitor until it clicks into place. . The image will display normally (not reversed). Always keep the LCD monitor closed with the display facing the camera body when the camera is not in use. When you push the LCD monitor until you hear the clicking sound, the LCD monitor will automatically turn off, and the image will display in the viewfinder. To cancel the Reverse Display function, press the n button, choose [Reverse Disp.] from the 4 tab, and press the qr buttons to choose [Off]. Setting the Date and Time The Date/Time settings screen will appear the first time the camera is turned on. Since the dates and times recorded into your images are based on these settings, be sure to set them. Turn on the camera. . Press the power button. • The Date/Time screen will appear. Set the date and time. . Press the qrbuttons to choose an option. . Press the op buttons or turn the A dial to set a value. Make the setting. . Press the m button. • Once the date and time have been set, the Date/Time screen will close. . Pressing the power button will turn off the camera. Reappearing Date/Time screen Set the correct date and time. If you have not set the date and time, the Date/ Time screen will appear each time you turn on the camera. Daylight saving time settings If you choose in Step 2 and press the opbuttons or turn the Adial and choose , you will set the time to daylight saving (1 hour ahead). 19 Setting the Date and Time Changing the Date and Time You can change the current date and time settings. Display the menus. . Press the n button. Choose [Date/Time] in the 3tab. . Press the qrbuttons to choose the 3 tab. . Press the op buttons or turn the A dial to choose [Date/Time], then press the m button. Change the date and time. . Follow Steps 2 and 3 on p. 19 to adjust the setting. . To close the menus, press the n button. Date/Time battery If [Date/Time] appear even when the date/time have been correctly set, insert a new date/time battery (p. 156). 20 Setting the Display Language You can change the display language in the LCD monitor menus and messages. Enter Playback mode. . Press the 1 button. Display the settings screen. . Press and hold the m button , then immediately press the n button . Set the display language. . Press the opqr buttons or turn the A dial to choose a language, then press the m button. • Once the display language has been set, the language menu will close. What if the clock appears when the m button is pressed? The clock will appear if too much time passes between pressing the m button and the n button in Step 2. If the clock appears, press the m button to remove the clock and repeat Step 2. You can also change the display language by pressing the n button, choosing the 3tab, and choosing the [Language] menu item. 21 Formatting Memory Cards Before you use a new memory card or one that has been used in other devices, you should format the card with this camera. Formatting (initializing) a memory card erases all data on the memory card. As you cannot retrieve the erased data, exercise adequate caution before formatting the memory card. Display the menu. . Press the n button. Choose [Format]. . Press the qrbuttons to choose the 3 tab. . Press the op buttons or turn the A dial to choose [Format], then press the m button. Format the memory card. . Press the qr buttons or turn the A dial to choose [OK], then press the m button. • The memory card will be formatted. • When formatting has finished, the menu screen will reappear. Formatting or erasing data on a memory card merely changes the file management information on the card and does not ensure its contents are completely erased. Be careful when transferring or disposing of a memory card. When disposing of a memory card, take precautions such as physically destroying the card to prevent personal information leaks. The total capacity of the memory card displayed in the formatting screen may be less than indicated on the memory card. Pressing the Shutter Button The shutter button has two stops. To take images that are in focus, be sure to first press the shutter button lightly (halfway) to focus, then take the shot. Press halfway (lightly to the first stop). • The camera automatically focuses and selects the necessary settings for shooting, such as the brightness. • When the camera focuses, it will beep twice. Press fully (to the second stop). • The camera...