Оценок - 3, средний балл: 4.7
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Auto On Off a b ..See the Advanced Guide: Red-Eye Reduction Function (p. 35). • See the Advanced Guide: Setting the Slow Synchro Function (p. 35). You are recommended to shoot with the camera attached to a tripod or other device if the camera shake warning icon appears. The option cannot be set in (Auto) mode. ..See the Advanced Guide: Functions Available in Each Shooting Mode (p. 160). See Selecting a Shooting Mode (p. 11). .. Shooting Close-Ups/Infinity Shots 1. Press the / button (a) and use the or button to switch between modes (b). To Cancel: press the / button and use the or button to display (Normal). a b Macro Use this mode to shoot close-ups of flowers or small items. Image Area at Minimum Focusing Distance from End of Lens to Subject • Maximum wide angle setting: 37 . 27 mm (1.5 . 1.1 in.) Minimum focusing distance: 3 cm (1.2 in.) • Maximum telephoto setting: 108 . 81 mm (4.3 . 3.2 in.) Minimum focusing distance: 30 cm (12 in.) Shooting Infinity Use this mode to record subjects 3 m (9.8 ft.) or more from the end ofthe lens. • Use the LCD monitor to compose close-ups in macro mode since images composed with the viewfinder may be off- center. • The exposure may not be optimal when the flash is used in macro mode. The option cannot be set in (Auto) mode. ..See the Advanced Guide: Functions Available in Each Shooting Mode (p. 160). See Selecting a Shooting Mode (p. 11). .. Using the Self-Timer 1. Press the button (a) and use the or button (b) to display , or . • When the shutter button is pressed fully, the self-timer will activate and the self-timer lamp will blink (when using red-eye reduction, it will stay lit for the last 2 seconds). • You can change the delay time and number of shots with the option (p. 17). To Cancel: press the button and display . a b 10 sec. Self-Timer: shoots 10 sec. after you press the shutterbutton. • 2 sec. before the shutter releases, the self-timer lamp and sound speed up*1 . 2 sec. Self-Timer: shoots 2 sec. after you press the shutter button. • The self-timer sound beeps quickly*1 when you press the shutterbutton and the shutter releases 2 sec. later. Custom Timer: you can change the delay time (0–10*2, 15, 20, 30 sec.) and number of shots (1–3*2–10). • When [Delay] is set to 2 or more sec., the self-timer sound beepsquickly 2 sec. before the shutter releases. When [Shots] is set tomore than 1, the self-timer sound only beeps before the first shot. *1 This may differ depending on your My Camera settings (Advanced Guide p. 109). *2 Default setting. The self-timer cannot be used in some shooting modes. ..See the Advanced Guide: Functions Available in Each Shooting Mode (p. 160). See Selecting a Shooting Mode (p. 11). .. • Changing the Delay Time and Number of Shots ( ) 1. In the [ (Rec)] menu, select [Self-timer] and press the FUNC./ SET button. • See Menus and Settings (p. 21). 2. Use the or button to select 3. tings selected for the first shot. • If the flash is used, the interval between shots lengthens because the flash must charge. • The interval between shots lengthens when the built-in memory of the camera fills. • Shooting will automatically cease if the memory card becomes full. Shooting Playback ba for the various playback methods Advanced GuideSee the 1.Slide the mode switch to (playback) (a). The last recorded image will display. Or if you have replayed images, the last image viewed will display (Resume Playback). If the memory card has been switched, or the images on the memory card have been edited with a computer, the newest image on the memory card appears. 2.Use the or button to display the image you wish to view (b). • Use the button to move to the previous image and the button to move to the next image. Holding the button down advances the images more rapidly, but shows them less clearly. ..available Erasing 1. In the playback mode, use the or button to select an image to erase (a) and press the button (b). a c b 2. Confirm that [Erase] is selected and press the FUNC./SET button (c). To exit instead of erasing, select [Cancel]. Please note that erased images cannot be recovered. Exercise adequate caution before erasing an image. • See the Advanced Guide: Erasing Images (p. 101). Playback/ Erasing Menus and Settings Settings for the shooting or playback modes or such camera settings as the print settings, date/time and sounds are set using the FUNC. menu or the Rec., Play, Print, Set up or My Camera menu. FUNC. Menu This menu sets many of the common shooting functions. This example shows the FUNC. menu in (Auto) mode. a b e c d a Slide the mode switch to or . b Press the FUNC./SET button. c Use the or button to select a menu item. • Some items may not be selectable in some shooting modes. d Use the or button to select an option for the menu item. • You can select further options with the MENU button for some options. • After selecting an option, you can press the shutter button to shoot immediately. After shooting, this menu will appear again, allowing y...