Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• The specified color accent is retained even if the camera's power is turned off. Shooting in the Color Swap Mode Original Color Desired Color (Before Swapping) (After Swapping) 1 Stills: FUNC. Menu *(Auto) *(Kids&Pets)/ (Color Swap). Movies: FUNC. Menu * (Standard) (Color Swap). See Menus and Settings (p. 25). *Default setting. Stills Movies . 2 ..The Color Swap mode will take effect. Shooting 61 3 . ..The camera will switch to color input mode and the display will alternate between the original image and the color swap image (using the previously set color). 4 Aim the camera so that the original color appears at the center of the LCD monitor and press the button. ..Only one color can be specified. ..You can use the or button to specify the range of colors that are swapped. • -5: Only takes the color that you want to swap • +5: Also takes colors close to the one that you want to swap 5 Aim the camera so that the desired color appears at the center of the LCD monitor and press the button. • Only one color can be specified. 6 Press to complete the setting, then shoot. • The default setting for color swap mode changes green into white. • You may not obtain the expected results if you use the flash. • The colors specified in the color swap mode are retained even if the camera's power is turned off. Changing the Save Method for the Original Image When shooting still images in the Color Accent or Color Swap mode, you can set whether or not to save the original image (pre-transformation) as well as the transformed one. (Rec.) Menu [Save Original] [On]/[Off]. See Menus and Settings (p. 26). ..If [On] is selected, the two images will be numbered consecutively with the altered image following the original. When [Save Original] is Set to [On] -Only the transformed image displays in the LCD monitor while shooting in the Color Accent or Color Swap mode. -The transformed image is reviewed in the LCD monitor after shooting in the Color Accent or Color Swap mode. If you erase the image at this point, the original image is erased along with the transformed image. Exercise adequate caution before deleting a file. -Since two images are recorded with each shot, the number of shots remaining is approximately half the number displayed when this function is set to [Off]. Shooting 63 Adjusting the ISO Speed Shooting Mode Raise the ISO speed to use a fast shutter speed when you wish to reduce the effects of camera shake or avoid blurry subjects, or to turn the flash off when shooting in a dark area. 1 Press the button and switch settings. ..Cycle through the / / / / / / speeds with each press of the button. ..Selecting (Auto) sets the optimal ISO speed according to the light level when shooting. Since the ISO speed setting will automatically be raised in dark places, the camera will select a faster shutter speed and reduce the chances of camera shake. .. Selecting (High ISO Auto)* sets the sensitivity to a higher value than the setting. This sets the shutter speed faster, reducing the potential for camera shake or blurry subjects compared with the setting. * Noise in the recorded image may be higher than for the setting. ..When in (Auto) shooting mode, only or can be selected. Setting the Auto Rotate Function Shooting Mode Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it in the LCD monitor. (Set up) Menu [Auto Rotate] [On]/[Off]. See Menus and Settings (p. 26). ..When shooting and the Auto Rotate function is set to [On] and the LCD monitor is set to the detailed display mode, the (normal), (right end is down) or (left end is down) will appear in the display. • This function may not operate correctly when the camera is pointed straight up or down. Check that the arrow is pointing in the right direction and if it is not, then set the Auto Rotate function to [Off]. • Even if the Auto Rotate function is set to [On], the orientation of images downloaded to a computer will depend upon the software used to download the images. • When the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be "up" and the lower end to be "down". It then regulates the optimal white balance, exposure and focus for vertical photography. This function operates regardless of the on/off status of the Auto Rotate function. • You can set the Auto Rotate function separately for the shooting and playback modes. -When the Auto Rotate function is set to [On] in shooting mode, the camera's orientation is recorded and the image is automatically switched to the correct orientation in playback mode. - When the Auto Rotate function is set to [On] in playback mode, images are rotated to their correct orientation in the LCD monitor according to the camera's orientation. 65 Shooting Creating an Image Destination (Folder) Shooting Mode You can create a new folder at any t...