Оценок - 5, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
1 See Menus and Settings (p. 27). 2 Select the contents you wish to set. ..Select [Theme] to set all to the same settings. Registering My Camera Settings Images recorded onto the memory card and newly recorded sounds can be added as My Camera settings to the and menu items. You can also use the supplied software to upload your computer’s images and sounds to the camera. A computer is required to restore the My Camera settings to the defaults. Use the supplied software (ZoomBrowser EX/ ImageBrowser) to restore the default settings to the camera. 1 Slide the mode switch to (playback) (My Camera) Menu Menu Item to register. See Menus and Settings (p. 27). 2 Select or and press . Customizing the Camera (My Camera Settings) 3 Select an image or record a sound. ..Start-up ImageSelect the image you wish to register and press the FUNC./SETbutton. ..Start-up, Operation, Self-timer and Shutter Sounds Select (Record) and press the FUNC./SET button. After recording, select (Register) and press the FUNC./SET button. -Recording will automatically stop when the recording time elapses. -To play it, select (Play). -To exit instead of registering, press (Exit). 4 Select [OK] and press . ..To cancel registering, select [Cancel]. • The following cannot be registered as My Camera settings. -Movies -Sounds recorded with the sound memo function (p. 76) • The prior setting is erased when a new My Camera setting is added. See the supplied Software Starter Guide for more information on creating and adding to the My Camera data. Troubleshooting Camera Camera will not operate. Power is not turned on. Memory card slot/battery cover is open. Insufficient battery voltage ("Change the battery pack" message displays). Poor contact between camera and battery terminals. ..Press the power button (Basic Guide p. 5). ..Confirm that the memory card slot/ battery cover is securely closed (Basic Guide p. 2). ..Insert a fully charged battery into the camera (Basic Guide p. 2). ..Use the AC Adapter Kit ACK-DC10 (sold separately) (p. 109). ..Polish the terminals with a soft cotton swab before charging or using the battery (p. 105). Sounds come from the camera interior. The camera's horizontal/ ..The camera's orientation vertical orientation was mechanism is operating. There is no changed. malfunction. When the power is turned on "Card locked!" message appears. The SD memory card's ..When recording to, erasing from or write protect tab is set to formatting the SD memory card, "Write protect". slide the tab upward (p. 107). The Date/Time menu appears. The built-in rechargeable ..Recharge the built-in battery lithium battery charge is immediately (Basic Guide p. 4). low. Troubleshooting LCD monitor The display darkens. The image in the LCD ..This does not constitute a monitor will darken in malfunction and has no effect on strong sunlight or bright images that have been shot. light. Display flickers. Display flickers when ..This is not a camera malfunction shot under fluorescent (flickering recorded in movies, but lighting. not in still images). A bar of light (red, purple) appears on the LCD monitor. Subject is too bright. ..This is a normal occurrence in devices containing CCDs and does not constitute a malfunction. This bar of light will not be recorded when shooting still photos, but it will be recorded when shooting movies. appears. A slow shutter speed has ..Raise the ISO speed (p. 63) or set likely been selected the flash to any setting other than because of insufficient (flash off), or secure the camera lighting. to something, such as a tripod (Basic Guide p. 9). appears. This displays when using a memory card that has print settings, transfer settings or slide show image selections set by other DPOF-compliant cameras. ..These settings will be overwritten by those set by your camera (p. 83). 94 Noise displays./Subject's movements are irregular. Camera automatically ..There is no effect on the recorded lightened the image image. displayed on the LCD monitor to make it easier to see when shooting in a dark area (p. 17). Shooting Camera will not record. Mode switch is set to (playback). Flash is charging. Memory card is full. Memory card is not formatted correctly. ..Set the mode switch to or (Basic Guide p. 6). ..The indicator will light orange when it is charged. You can then press the shutter button (p. 22). ..Insert a new memory card (Basic Guide p. 2). ..If required, download the images to a computer and erase them from the memory card to make space. ..Format the memory card (p. 23). ..If reformatting does not work, the memory card logic circuits may be damaged. Consult the nearest Canon Customer Support Help Desk. SD memory card is write ..Slide the write protect tab of the SD protected. memory card upward (p. 107). Image Seen in Viewfinder vs. Recorded Image Usually the recorded ..Confirm the actual image size with image contains more of the LCD monitor. Use the LCD the scene than is seen in monitor when taking close-up shots the viewfinder....