Войти:
Оценок - 4, средний балл: 4 ( )

Инструкция по эксплуатации Canon, модель PowerShot SD110

Производитель: Canon
Размер: 2.91 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Subject is bright in contrast to the background • Set the exposure compensation to a negative (-) setting or use the spot metering function. Light is shining directly on the subject or reflected off the subject into the camera • Change the shooting angle. Flash is set to on • Set the flash to off. Problem Cause Solution A bar of light (red, purple) appears on the LCD monitor Subject is too bright • This is a normal occurrence in devices containing CCDs and does not constitute a malfunction. (This bar of light will not be recorded when shooting still photos, but it will be recorded when shooting movies.) White dots appear on the image Light from the flash has reflected off dust particles or insects in the air. (This is especially noticeable when shooting at wide angle) • This is a phenomenon that occurs with digital cameras and does not constitute a malfunction. Flash does not fire Flash is set to off • Set the flash to on. Image not showing on TV monitor Incorrect video system setting • Set the video system to the appropriate setting, NTSC or PAL, for your TV (p. 49). Shooting in stitch assist • The output will not appear on a TV in stitch assist. Cancel the stitch assist. Zoom does not work Zoom lever pressed during movie recording • Adjust the zoom before shooting a movie. Reading images from SD card is slow SD card was formatted in another device • Use an SD card formatted in your camera. See Formatting SD Cards (p. 107). Recording images to SD card takes a long time Troubleshooting 139 Appendix Using an AC Adapter Kit (Sold Separately) It is best to power the camera with AC Adapter Kit ACK900 (sold separately) when you are using it for long periods of time or connecting it to a computer. Compact Power Adapter CA-PS500 1 Connect the power cord to the compact power adapter first and then plug the other end into the power outlet. Battery Lock DC Coupler DR-900 2 Open the SD slot/battery cover, then insert the DC coupler until it is locked. • Insert the DC coupler while pressing the battery lock as the arrow shows. • Slide the SD card slot/battery cover closed. 3 Use of an AC adapter kit other than ACK900 (sold separately) may Open the DC coupler terminal cover and attach the cord to the DC terminal. After you have finished using the camera, unplug the AC adapter from the power outlet. Turn the camera power off before connecting or disconnecting the AC adapter. cause a malfunction in the camera or kit. 140 Camera Care and Maintenance Use the following procedures to clean the camera body, lens, viewfinder and LCD monitor. Never use thinners, benzene, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper. Lens First use a lens blower brush to remove dust and dirt, then remove any remaining dirt by wiping the lens lightly with a soft cloth. Never use synthetic cleansers on the camera body or lens. If dirt remains, contact the closest Canon Customer Support Help Desk as listed on the separate Canon Customer Support leaflet. Viewfinder and LCD Monitor Use a lens blower brush to remove dust and dirt. If necessary, gently wipe with a soft cloth or an eyeglass lens wiper to remove stubborn dirt. Never rub or press strongly on the LCD monitor. These actions may damage it or lead to other problems. Appendix 141 Specifications All data is based on Canon’s standard testing methods. Subject to change without notice. PowerShot SD110 DIGITAL ELPH / DIGITAL IXUS IIs (W): wide angle (T): telephoto Camera Effective Pixels Approx. 3.2 million Image Sensor 1/2.7-inch CCD (Total number of pixels: Approx. 3.3 million) Lens 5.4 (W) – 10.8 (T) mm (35 mm film equivalent: 35 (W) – 70 (T) mm) f/2.8 (W) – f/3.9 (T) Digital Zoom Approx. 3.2x (Up to approx. 6.4x in combination with the optical zoom) Optical Viewfinder Real-image zoom viewfinder LCD Monitor 1.5-inch, low-temperature polycrystalline silicon TFT color LCD, approx. 118,000 pixels (Picture coverrage 100%) AF System TTL autofocus Focusing frame: 9-point AiAF/1-point AF (center) Shooting Distance Normal AF: 47 cm (1.5 ft.) – infinity (From the front of the Macro AF: 10 – 47 cm (W)/23 – 47 cm (T) lens) (3.9 in. – 1.5 ft. (W)/9.1 in. – 1.5 ft. (T)) Shutter Mechanical shutter + electronic shutter Shutter Speeds 15 – 1/1500 sec. 15 – 1 sec. possible in long shutter mode. Slow shutter speeds of 1.3 sec. or slower operate with noise reduction. Light Metering System Evaluative, Center-weighted average or Spot (Center) Exposure Control System Program AE Exposure Compensation ± 2.0 stops in 1/3-stop increments Sensitivity Auto, ISO 50/100/200/400 equivalent White Balance TTL auto, pre-set (available settings: Daylight, Cloudy, Tungsten, Fluorescent or Fluorescent H) or custom Built-in Flash Auto/Red-eye reduction auto/on/off/slow-synchro Flash Range Normal: 47 cm – 3.0 m (1.5 – 9.8 ft.) (W), 47 cm – 2.0 m (1.5 – 6.6 ft.) (T) Macro: 27 cm – 47 cm (1...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории