Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
1 1 Turn the mode dial to . • The shutter speed and aperture setting will show in the display panel. They will also appear on the LCD monitor if it is on. 2 2 Click the main dial and select a setting content (shutter speed or aperture value). • Clicking the main dial switches between the shutter speed and the aperture value setting. 3 3 Turn the main dial and select a shutter speed or an aperture value. 4 4 Shoot the image. • When you press the shutter button halfway, the exposure compensation bar displays in the display panel and a number in the LCD monitor indicates the difference between standard exposure* and the selected exposure. If the difference is more than ±2 stops, the LCD Displays in red monitor shows a red “-2” or “+2”. * The standard exposure is calculated by the AE function according to the selected metering method. 0000000000000000000000 • Functions Available in Each Shooting Mode (p. 204) • For the correlation between aperture value and shutter speed, see page 78. • If you wish to change the exposure, adjust the shutter speed or the aperture using the main dial. • When you select a fast shutter speed or shoot a subject in a dark place, set the flash to (Red-Eye Reduction, Flash On) or (Flash On), or attach an externally mounted flash so that the LCD monitor's brightness matches the selected shutter speed and aperture value. The LCD monitor will always light up when the flash is on. Shooting - Selecting Particular Effects 81 Selecting an AF Frame The AF frame indicates the area of the composition on which the camera focuses and can be set manually to the desired area. This is convenient for focusing accurately on an off-center subject to obtain the composition you desire. However, the AF frame is fixed to center-point when an image is shot using the viewfinder with the LCD monitor off or when using the digital zoom, even if you previouslly set the AF frame to the position you desire. 1 Press the button to turn on the LCD monitor. 2 2 Press the button. • The AF frame appears in green on the LCD monitor. 3 3 Move the AF frame to the desired area using the C,D,B or A arrows on the omni selector. 4 4 Press the button. • You can immediately shoot the image using the selected AF frame by pressing the shutter button instead of pressing the button. 5 5 Shoot the image. 0000000000000000000000 • Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 204). • The AF frame will move back to its original position (Center) if you hold down the button. • The AF frame can also be moved in the macro mode. • The AF frame can be set in both the macro mode and the standard mode. • The AF frame cannot be moved while focusing manually. • When the Spot AE Point is selected as the light metering mode, you can use the selected AF frame as the Spot AE Point (p. 83). • For an explanation of the AF frame colors, please refer to page 39. Switching between Light Metering Modes Evaluative Metering is the default light metering mode. This can be switched to another metering mode. Evaluative Light Metering Appropriate for standard shooting conditions, including backlit scenes. The camera divides images into several zones for light metering. The camera evaluates the complex lighting conditions, such as the position of the subject, the brightness, the background, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject. Center-Weighted Averaging Averages the exposure from the entire image, but places more weight on the subject at the center. Use this mode when the subject is backlit or surrounded by bright light. Spot AE Point Center AF Point Meters the area within the spot AE point frame at the center of the LCD monitor. Meters the spot AF point corresponding to the AF frame. 1 1 Press the button to turn on the LCD monitor. 2 2 Press the button to select the metering mode. • Each press of the button changes the metering mode as follows. (Evaluative Light (Center-Weighted Metering) Averaging) (Spot AE Point) • The icon of the currently selected light metering mode appears on the display panel. It also appears on the LCD monitor if it is on. If you have selected (Spot AE Point), go to step 3. If you have selected (Evaluative Light Metering) or (Center- Weighted Averaging), go to step 5. Shooting - Selecting Particular Effects 83 Switching between Light Metering Modes (continued) 3 In the [ (Rec.)] menu, select [Spot AE Point]. • See Selecting Menus and Settings (p. 42). 4 4 Select the [Center] or [AF Point] option, then press the button. • When [Spot AE Point] is set to [Center], the spot AE point frame appears at the center of the LCD monitor, and when [Spot AE Point] is set to [AF Point], it appears inside the AF frame. e.g. Center Spot AE Point Frame 5 5 Shoot the image. 0000000000000000000000 • Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shootin...