Оценок - 5, средний балл: 4.2
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
When aspect ratio information is attached to an image shot with EOS1D Mark IV, EOS-1Ds Mark III, EOS-1D Mark III or EOS 7D, the trimming range based on the aspect ratio information is displayed. 1 1 Select the image to be trimmed. 2 2 Open the trimming/angle adjustment window. O Select the [Tools] menu .. [Start Trimming/ Angle Adjustment tool]. . The trimming/angle adjustment window appears. . Editing can be done once the trimming/ angle adjustment window has reached a clear display. 3 3 Adjust the angle of the image as needed. Trimming/angle adjustment window Use the mouse (click ../ .. ) to adjust the angle or directly enter the adjustment angle* (0.01-degree increments; adjustable range: -45 to +45 degrees) Click (rotate image left or right in 90-degree increments) Drag* (0.01-degree increments; adjustment range: -45 to +45 degrees) Largest possible trimming range * You cannot adjust the angle of images that exceed 6666 x 4444 pixels in size. O If you click [Center on Screen], you can display the trimming range in the center of the window. O If you click the [OK] button after adjusting only the angle of the image, the image will be trimmed at the largest possible trimming range. 12345Introduction Contents at a Glance Basic Operation Advanced Operation Advanced Image Editing and Printing EditingJPEG/TIFFImages Index Processing Large Numbersof Images Reference 4 4 Select a ratio and drag the trimming range. Cancel Select a trimming ratio Drag the trimming range O The trimming range can be moved by dragging. O You can enlarge or reduce the size of the trimming range by dragging the four corners of the trimming range. O List of aspect ratios (width : height) [Free] : You can trim an image to any size, regardless of the selectable ratio. [Custom]: You can trim an image at the specified ratio. 5 5 Click the [OK] button to return to the main window. . The trimming range frame is displayed in the trimmed image (p.109) . . When the trimmed image is displayed in an edit window or the edit image window, it is displayed in its trimmed form. 12345Introduction Contents at a Glance Basic Operation Advanced Operation Advanced Image Editing and Printing EditingJPEG/TIFFImages Index Processing Large Numbersof Images Reference About trimmed images O The trimmed range can be reverted to its original condition at any time A trimmed image is displayed or printed as a trimmed image. However, since the image is not actually trimmed, you can always revert to the original image by clicking the [Reset] button in the trimming/angle adjustment window or performing the “Re-Editing an Image” procedure (p.103) . O Display of the trimmed image in each window • Main window: The frame showing the trimming range is displayed on the image (p.109) . • Edit window: The image is displayed in its trimmed condition. • Edit image window: The thumbnail image is the same as the main window display, and the enlarged image is the same as the edit window display. O Printing a trimmed image You can print as a trimmed image by printing it in DPP. O The image becomes a trimmed image when saved as a separate image The trimmed JPEG or TIFF image actually becomes a trimmed image when saved as a separate image (p.103) . O Images that have aspect ratio set will be displayed as trimmed images When aspect ratio information is attached to an image shot with EOS1D Mark IV, EOS-1Ds Mark III, EOS-1D Mark III or EOS 7D, the set trimming range based on the aspect ratio information is displayed. However, since the image is not actually trimmed, you can change the trimming range or revert to the condition before trimming. When reverting to the condition before trimming is performed based on the aspect ratio information at the time of shooting, click the [Reset] button. Also, if you want to cancel all the trimming range, click the [Clear] button (p. 117) . Convenient functions of the trimming/angle adjustment window O Switch between screens using the keyboard You can also switch between full screen display/normal screen display by pressing the < Alt> +