Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
The setting is reset without the resetting operation. • The battery pack was removed when the power switch was set to ON. When removing the battery pack, make sure the camera is turned off and the access lamp is not lit (pages 15, 20). The camera does not work properly. • Turn off the camera. Remove the battery pack and insert it again. If the camera is hot, remove the battery pack, and allow it to cool down before trying this corrective procedure. • If an AC Adaptor (sold separately) is used, disconnect the power plug. Connect the power plug and turn on the camera again. If the camera does not work after doing these solutions, consult your Sony dealer or local authorized Sony service facility. Others 187 The five bars of the SteadyShot scale flashes. The five bars of the SteadyShot scale flashes. The SteadyShot function does not work. You can continue to shoot but the SteadyShot function will not work. Turn the camera off and on. If the SteadyShot scale continues to flash, consult your Sony dealer or local authorized Sony service facility. “--E-” is indicated on the screen. • Remove the memory card, and insert it again. If this procedure does not turn off the indication, format the memory card. 188 Warning messages Warning messages Incompatible battery. Use correct model. • An incompatible battery pack is being used. Set Area/Date/Time. • Set the area and date, time. If you have not used the camera for a long time, charge the internal rechargeable battery (pages 28, 192). Power insufficient. • You tried to perform [Cleaning Mode] when the battery level is insufficient. Charge the battery pack or use the AC Adaptor (sold separately). Unable to use memory card. Format? • The memory card was formatted on a computer and the file format was modified. Select [Enter], then format the memory card. You can use the memory card again, however, all previous data in the memory card is erased. It may take a some time to complete the format. If the message still appears, change the memory card. Memory Card Error • An incompatible memory card is inserted or the format has failed. Reinsert memory card. • The inserted memory card cannot be used in your camera. • The memory card is damaged. • The terminal section of the memory card is dirty. Memory card locked. • You are using a memory card with a write-protect switch, and the switch is set to the LOCK position. Set the switch to the recording position. This memory card may not be capable of recording and playing normally. • The inserted memory card cannot be used with the camera. Processing... • When Long exposure noise reduction will be done for the same amount of time that the shutter was open. You cannot do any further shooting during this reduction. Unable to display. • Images recorded with other cameras or images modified with a computer may not be able to be displayed. Others 189 Check the lens attachment. If the lens is not supported, you can permit use of the lens in the custom menu. Check the lens attachment. If the lens is not supported, you can permit use of the lens in the custom menu. The lens is not attached properly, or the lens is not attached. • When attaching the camera to an astronomical telescope or something similar, set [Release w/oLens] to [Enable]. Contains no still images. Contains no movies. • There is no image in the memory card. Image protected. • You tried to delete protected images. Unable to print. • You tried to mark RAW images with a DPOF mark. Camera overheating. Allow it to cool. • The camera has become hot because you have been shooting continuously. Turn the power off. Cool the camera and wait until the camera is ready to shoot again. • Because you have been recording for a long time, the temperature inside the camera has increased to an unacceptable level. Stop recording. Recording is unavailable in this movie format. • Set [Movie: File Format] to [MP4]. • The number of images exceeds that for which date management in a database file by the camera is possible. • Unable to register to the database file. Import all the images to a computer using “PMB” and recover the memory card. Camera Error System Error • Turn the power off, remove the battery pack, then re-insert it. If the message appears frequently, consult your Sony dealer or local authorized Sony service facility. Image Database File error. Reboot. • There is something wrong occurred in the Image Database File. Execute [Recover Image DB] (page 147). 190 Image Database File error. Recover? Image Database File error. Recover? You cannot record or play back AVCHD format movies because the Image Database File is damaged. Follow the on-screen instructions to recover data. Unable to magnify. Unable to rotate image. • Images recorded with other cameras may not be enlarged or rotated. No images changed • You attempted to specified DPOF without specifying images. Cannot create more folders. • The folder with a name beginning with “999” exists on the memory card. You cannot create any folder...
Эта инструкция также подходит к моделям:Фотоаппараты - SLT-A55 (11.33 mb)
Фотоаппараты - SLT-A55V (11.33 mb)
Фотоаппараты - SLT-A33L (11.33 mb)
Фотоаппараты - SLT-A33Y (11.33 mb)