Оценок - 4, средний балл: 3.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• After shooting, the noise reduction will be done for the same amount of time that the shutter was open. When the message “Processing...” appears, you cannot do any further shooting. You can cancel this function with [Long exp.NR] in the Recording menu (page 103). • The Super SteadyShot function is automatically turned off. • The higher the ISO sensitivity, or the longer the exposure time, the more outstanding the noise on the monitor. • To reduce camera-shake, connecting the Remote Commander is recommended (pages 60, 166). To attach the eyepiece cover When the shutter is released without the use of the viewfinder, as in bulb exposure or shooting with the self-timer, attach the eyepiece cover to prevent light from entering through the viewfinder and affecting the exposure. 1Carefully slide the eyecup off by pushing on each side of the eyecup. 2Slide the eyepiece cover over the viewfinder. The cover is normally attached to the shoulder strap. Exposure Exposure is the amount of light that the camera will receive when you release the shutter. The exposure is automatically set to the proper value in the auto adjustment mode. However, you can set the exposure to your desired setting in the following setup. Adjusting the exposure You can manually shift the exposure value determined by the camera. Use this mode when you brighten or darken the overall screen. (Exposure) button Multi-selector 1 Press the (Exposure) button to display the Exposure comp. screen. The compensation level is also checked on the EV scale in the viewfinder. 2 Adjust the exposure with b/B on the multi-selector. Toward +: Brightens an image. 0: The exposure is determined automatically by the camera. Toward –: Darkens an image. Toward – Toward + • You can substitute the Fn (Function) button for the (Exposure) button (page 30). • The exposure is compensated by 1/3 of a step between ±3.0 EV. You can set this exposure step to 1/2 EV increments with [Exposure step] in the Recording menu (page 98). Using the shooting functions z Shooting techniques When shooting a whitish overall image such as a backlit subject or a snowy scene, the camera judges that the subject is too bright and may set a darker exposure for the image. In such cases, adjustment of the exposure in the + plus direction is effective. Adjust in the + direction When shooting a darker overall image, the camera judges that the subject is too dark and may set a brighter exposure for the image. In such cases, adjustment of the exposure in the – minus direction is effective. Adjust in the – direction Locking the exposure (AE lock) You can fix the exposure before deciding on the composition when taking a picture. This is effective when the metering object and focusing object are different, or when you want to shoot continuously while keeping the same exposure value. Shutter button AEL (AE lock) button 1 Target the subject for which you want to meter the exposure. • Adjust the focus (you do not need to lock the focus.) 2 Press the AEL (AE lock) button. • lights up in the viewfinder and on the LCD monitor to indicate that the exposure is locked. 3 While pressing the AEL (AE lock) button, recompose the image, if necessary, and press the shutter button to take the picture. • If the AEL (AE lock) button is kept down after a shot, you can continue to shoot with the same exposure value. The setting is canceled when the button is released. • When the flash is fired in a mode other than shutter speed priority mode or manual mode, the slow sync shooting is performed (page 77). • You can set the camera to keep the exposure value after releasing the AEL (AE lock) button or to temporarily perform spot metering with [AEL button] in the Custom menu (page 107). About the EV scale when the AEL (AE lock) button is pressed While you press the AEL (AE lock) button, an exposure value determined by the camera is locked as the standard value (0). At the same time, an exposure value within the spot metering circle appears as the second standard index. • If the exposure is beyond the range of the EV scale, bB appears at the end of the EV scale. The bB starts flashing if the difference becomes any greater. Example: When the composition is determined in the scene below and the AEL (AE lock) button is pressed 1 Slightly darker area 2 Bright area Spot metering circle The indicator displays are as follows when the AEL (AE lock) button is pressed. AEL (AE lock) button is pressed Recompose on 1 while holding the AEL (AE lock) button down Recompose on 2 while holding the AEL (AE lock) button down Turn the camera on 2 and the light level of 2 is displayed. The arrow indicates 2 will white out. The locked exposure is equal to the light level within the spot metering circle. Multi segment/ Center weighted meteringThe locked exposure The light level within the spot metering circle is 0.3 EV less than the locked exposure (varies according to the recomposition of the shot). The locked exposure The light level of 1 is 1.3 EV less...
Эта инструкция также подходит к моделям:Фотоаппараты - DSLR-A700K (5.3 mb)
Фотоаппараты - DSLR-A700P (5.3 mb)
Фотоаппараты - DSLR-A700Z (5.3 mb)