Оценок - 2, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• The battery pack is discharged. Insert a charged battery pack (page 13). • The battery pack is dead. Replace it with a new one. • Use a recommended battery pack. The power turns off suddenly. • Depending on the camera and battery temperature, the power may turn off automatically to protect the camera. In this case, a message is displayed on the LCD screen before the power turns off. • If you do not operate the camera for about three minutes while the power is on, the camera turns off automatically to prevent wearing down the battery pack. Turn on the camera again (page 18). • The battery pack is dead. Replace it with a new one. Others 69GB The remaining charge indicator is incorrect. The remaining charge indicator is incorrect. The battery charge will quickly get used up and the actual remaining battery charge will be lower than the indicator in the following cases: – When you use the camera in an extremely hot or cold location. – When you use the flash and zoom frequently. – When you repeatedly turn the power on and off. – When you set the screen brightness higher using DISP (screen display) settings. • A discrepancy arose between the remaining charge indicator and the actual remaining battery charge. Fully discharge the battery pack once, then charge it to correct the indication. • The battery pack is discharged. Insert the charged battery pack (page 13). • The battery pack is dead. Replace it with a new one. Cannot charge the battery pack while it is inside the camera. • You cannot charge the battery pack using the AC Adaptor (sold separately). Use the battery charger (supplied) to charge the battery. The CHARGE lamp flashes while charging the battery. • Remove and reinsert the battery pack, making sure it is installed correctly. • The temperature may be inappropriate for charging. Try charging the battery pack again within the proper charging temperature range (10 °C to 30 °C (50 °F to 86 °F)). Shooting still images/movies Cannot record images. • Check the free capacity of the internal memory or “Memory Stick Duo” media (pages 32, 45). If it is full, do one of the following: – Delete unnecessary images (page 48). – Change the “Memory Stick Duo” media. • You cannot record images while charging the flash. • When shooting a still image, set the mode dial to other than (Movie Mode). • Set the mode dial to (Movie Mode) when shooting movies. • You can record movies with an image size of [1440.1080(Fine)], [1440.1080(Standard)] or [1280.720] on “Memory Stick PRO Duo” media. When using recording media other than “Memory Stick PRO Duo” media, set the movie image size to [VGA]. • The camera is in Smile Shutter demonstration mode. Set [Demo Mode] to [Off]. Cannot create panoramic images. • Pan the camera as the guidance bar with a constant velocity. You cannot create panoramic images in the following situations: – Pan the camera too fast or too slow. – Pan the camera in the different direction from the setting. • If there is too much camera shake during panning, the shooting stops. Hold the camera firmly. 70GB Viewing images Viewing images • Press the (Playback) button (page 21). • The folder/file name has been changed on your computer. • No guarantees are made for playing back, on this camera, files containing images which were processed on a computer or images which were shot using other cameras. • The camera is in USB mode. Delete the USB connection. • You may not be able to play back some images stored on the “Memory Stick Duo” media shot using other cameras. Play such images in Folder View (page 47). • This is caused by copying images on your computer to the “Memory Stick Duo” media without using the “PMB.” Play such images in Folder View (page 47). Others 71GB Precautions Precautions • In an extremely hot, cold or humid place In places such as in a car parked in the sun, the camera body may become deformed and this may cause a malfunction. • Under direct sunlight or near a heater The camera body may become discolored or deformed, and this may cause a malfunction. • In a location subject to rocking vibration • Near strong magnetic place • In sandy or dusty places Be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired. On cleaning Cleaning the LCD screen Wipe the screen surface with an LCD cleaning kit (sold separately) to remove fingerprints, dust, etc. Cleaning the lens Wipe the lens with a soft cloth to remove fingerprints, dust, etc. Cleaning the camera surface Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. To prevent damage to the finish or casing: – Do not expose the camera to chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent, sunscreen or insecticide. – Do not touch the camera with any of the above on your hand. – Do not leave the camera in contact with rubber or vinyl for a long time. On operating tem...