Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Tab WARNING Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. • When the lithium battery becomes weak, the operating distance of the Remote Control may shorten, or the Remote Control may not function properly. In this case, replace the battery with a Sony CR2025 lithium battery. Use of another battery may present a risk of fire or explosion. • The Remote Control has a button type lithium battery (CR2025) built in. Do not use batteries other than CR2025. 1 Preparing the battery pack CHARGE lamp Plug CHARGE lamp Power cord (mains lead) For customers in the USA and Canada For customers other than those in the USA and Canada 1Insert the battery pack into the battery charger. 2Connect the battery charger to the wall outlet (wall socket). The CHARGE lamp lights on, and charging starts. When the CHARGE lamp turns off, charging is finished (Practical charge). If you continue charging the battery pack for about one more hour (until it is fully charged), the charge will last slightly longer. [ Charging time Full charge time Practical charge time Approx. 330 min. Approx. 270 min. • Time required to charge a fully depleted battery pack at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions. • See page 32 for the number of images that can be recorded. • Connect the battery charger to an easily accessible wall outlet (wall socket) close by. • Even if the CHARGE lamp is not lit, the battery charger is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If some trouble occurs while using the battery charger, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). • When charging is finished, disconnect the power cord (mains lead) from the wall outlet (wall socket), and remove the battery pack from the battery charger. • Designed for use with compatible Sony batteries. 2 Inserting the battery pack/a “Memory Stick Duo” (not supplied) Insert the “Memory Stick Duo” all the way in as shown in the illustration until it clicks. Battery/“Memory Stick Duo” cover Insert the battery pack while pressing the battery eject lever with the tip of the battery pack. 1Open the battery/“Memory Stick Duo” cover. 2Insert the “Memory Stick Duo” (not supplied) all the way in until it clicks. 3Insert the battery pack. 4Close the battery/“Memory Stick Duo” cover. [ When there is no “Memory Stick Duo” inserted The camera records/plays back images using the internal memory (approx. 31 MB). [ To check the remaining battery time Press POWER button to turn on and check the remaining battery on the LCD screen. Battery remaining indicator Battery Sufficient Battery Battery half Battery low, Change the battery remaining power almost fully full recording/ with fully charged guidelines remaining charged playback one, or charge the will stop battery. (The warning soon. indicator flashes.) • It takes about one minute until the correct battery remaining indicator appears. • The displayed battery remaining indicator may not be correct under certain circumstances. • The Clock Set screen appears when the camera is turned on for the first time (page 15). [ To remove the battery pack/“Memory Stick Duo” Open the battery/“Memory Stick Duo” cover. “Memory Stick Duo” Battery pack Slide the battery eject lever. Make sure that the Be sure not to drop the battery pack. access lamp is not lit, then push the “Memory Stick Duo” in once. • Never remove the battery pack/“Memory Stick Duo” when the access lamp is lit. This may cause damage to data in the “Memory Stick Duo”. 3 Turning the camera on/setting the clock POWER button Control button 1 2 3 z button HOME button (Playback) button 1Press the POWER button or press (Playback) button. 2Set the clock with the control button. 1 Select the date display format with v/V, then press z. 2 Select each item with b/B and set the numeric value with v/V, then press z. 3 Select [OK], then press z. [ To change the date and time Press the HOME button, and select [ Clock Settings] in (Settings) (pages 23, 24). [ When you turn on the power If the camera is running on battery power and you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto power-off function). Shooting images easily Tripod receptacle (bottom) Shutter button W/T (Zoom) button MENU button Control button HOME button Macro button Self-timer button DISP button Flash button Mode dial Microphone Finder 1Select the desired function from the mode dial. When shooting still images (Auto Adjustment mode): Select . When shooting movies: Select . 2Hold the camera steady, keeping your arm at your side. Position the subject in the center of the focus frame. 3Shoot with the shutter button. When shooting still images: 1 Press and hold the shutter button halfway down to focus. The z (AE/AF lock) indicator (green) flashes, a beep sounds...
Эта инструкция также подходит к моделям:Фотоаппараты - DSC-H9 (2.58 mb)