Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• The numerical portions of a movie file recorded in movie mode and its corresponding index image file are the same. Enjoying images on your computer Viewing an image previously copied to a computer This operation is required for viewing image files that have been copied previously to a computer and already deleted from the “Memory Stick” using the camera. Copy the image files stored on your computer to a “Memory Stick” and view them on the camera. • Skip Step 1 if you have not changed the file name assigned by this camera. • You may not be able to view the image depending on the image size. • Images modified with a computer or images shot using other than this camera may not be able to be played back on the camera. • If the warning message for overwriting the data appears, enter other numbers in Step 1. • If there is no folder to store the image file, create a new folder, then copy the image file. For details on how to create the folder, see page 47. a Right-click the image file, then click [Rename]. Change the file name to “DSC0ssss”. ssss stands for any number within the range from 0001 to 9999. • A file extension may be indicated depending on the setup of the computer. The extension of a still image is “JPG” and that of a movie is “MPG”. Do not change the extension. b Copy the image file to a folder on the “Memory Stick.” 1 Right-click the image file, then click [Copy]. 2 Select and double-click the [DCIM] folder from [Removable Disk] or [Sony MemoryStick] in [My Computer]. 3 Right-click the [sssMSDCF] folder in the [DCIM] folder, then click [Paste]. sss stands for any number within the range from 100 to 999. Installing “Picture Package” “Picture Package” is only for Windows computers. You can use the “Picture Package” software on your Windows computer to manage the images shot with your camera. Installing the “Picture Package” software installs the USB driver at the same time. • When the computer is in use, shut down all application software currently running before you install “Picture Package.” For computer environment See page 79 for the basic Windows operating environment. Other system requirements are as follows. Software: Macromedia Flash Player 6.0 or later, Windows Media Player 7.0 or later, and DirectX 9.0b or later. Sound card: 16-bit stereo sound card with speakers Memory: 64 MB or more (128 MB or more is recommended) Hard Disk: Disk space required for installation: approximately 200 MB Display: A video card equipped with 4 MB VRAM (DirectDraw driver compliant) • When automatically creating slide shows (page 90), a Pentium III 500 MHz or faster CPU is required. • This software is compatible with the DirectX technology. “DirectX” must be installed before using. • A separate environment for operating the recording device is required in order to write to CD-Rs. a Turn on your computer, and insert the supplied CD-ROM into the CD-ROM drive. The installation menu screen appears. • If you have not yet installed the USB driver (page 80), do not connect the camera to the computer before you install the “Picture Package” software (except Windows XP). b Click [Picture Package]. The “Choose Setup Language” screen appears. c Select the desired language, then click [Next]. e Click [Next]. • This section describes the English screen. d Click [Next]. The “License Agreement” screen appears. Read the agreement carefully. If you accept the terms of the agreement, check the “I accept the terms of the license agreememt” checkbox, then click [Next]. Enjoying images on your computer f Click [Install] on the “Ready to Install the Program” screen. The installation starts. If the “Welcome to setup for Direct X” screen appears after you install the application software, follow the instructions. g Confirm if the checkbox of “Yes, I want to restart my computer now” is checked, then click [Finish]. Your computer restarts. The shortcut icons of “Picture Package Menu” and “Picture Package destination Folder” are displayed. h Remove the CD-ROM. Copying images using “Picture Package” Connect the camera and your computer with the USB cable. “Picture Package” starts up automatically and the images in the “Memory Stick” are copied to the computer automatically. After the images are copied, “Picture Package Viewer” starts up and the images copied are displayed. • Normally “Picture Package” and “Date” folders are created inside the “My Documents” folder, and all of the image files recorded with the camera are copied into these folders. • If “Picture Package” cannot copy images automatically, start up “Picture Package Menu” and check [Settings] in [Copy automatically]. • Windows XP is set so that the OS AutoPlay Wizard activates. If you deactivate the OS AutoPlay Wizard, cancel the activation using [Settings] on the “Picture Package Menu.” Using “Picture Package” Start up the “Picture Package Menu” on the desktop to use the various functions. • The default screen may differ depending on your computer. You can change the order of t...
Эта инструкция также подходит к моделям:Фотоаппараты - DSC-P43 (2.63 mb)