Оценок - , средний балл:
(
)
)
Производитель: Sony
Размер: 2.03 mb
Название файла: 3078812131.pdf
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
• The camera was connected to a computer with the USB cable before installing the USB driver, so the device was not recognized by the computer. • No “Memory Stick” is inserted. p Use the supplied USB cable (page 69). p Disconnect the USB cable, and connect it again firmly. Make sure that “USB MODE” is displayed on the LCD screen (pages 69 and 92). p Set it to [NORMAL] (page 92). p Disconnect the USB cables except for the ones connected to the keyboard, the mouse, and your camera. p Install the USB driver (pages 59 and 79). p Delete the device which is not recognized, then install the USB driver (pages 59 and 73). p Insert a “Memory Stick.” You cannot copy images. • The camera is not correctly connected to your computer. • You are not using the correct copy procedure for your OS. — p Connect the camera and your computer correctly using the USB cable (page 69). p Follow the designated copy procedure for your OS (pages 57, 71, 74 and 80). p If you are using the “PIXELA ImageMixer for Sony” application software, click on HELP. Troubleshooting Symptom Cause Solution You cannot turn on the camera during USB connection. • The camera and your computer are connected through a hub. p Connect the camera directly to your computer. The image cannot be played back on a computer. — — p If you are using the “PIXELA ImageMixer for Sony” application software, click on HELP. p Consult the computer or software manufacturer. The image is interrupted by noise when you view a movie on a computer. • You are playing back the file directly from the “Memory Stick.” p Copy the file to the hard disk of your computer and then play back the file from the hard disk. You cannot print an image. — p Check the printer settings. p Click on the HELP files for the “PIXELA ImageMixer for Sony” application software. An error message appears when you set the supplied CD-ROM in your computer. • The computer display is not set correctly. p Set the computer display as follows: Windows: 800 . 600 dots or higher High Color (16-bit color, 65 000 colors) or higher Macintosh: 800 . 600 dots or higher 32 000-color or higher “Memory Stick” Symptom Cause Solution You cannot insert a “Memory Stick.” • You are inserting it backwards. p Insert it from the right side (page 22). You cannot record on a “Memory Stick.” • The write-protect switch on the “Memory Stick” is set to the LOCK position. • The “Memory Stick” is full. p Set it to the recording position (page 95). p Delete unnecessary images (page 53). You cannot format a “Memory Stick.” • The write-protect switch on the “Memory Stick” is set to the LOCK position. p Set it to the recording position (page 95). Symptom Cause Solution You have formatted a “Memory Stick” by mistake. • All the images on the “Memory Stick” are deleted by formatting and cannot be restored. — Other Symptom Cause Solution Your camera does not work. • The battery level is low. (The E indicator appears.) • The USB cable is connected. • The built-in microcomputer is not working properly. p Charge the batteries (page 12). p Disconnect the USB cable, or operate on your computer. p Turn the power off and then on after one minute, and check that the camera works properly. The power is on, but the camera does not work. • The built-in microcomputer is not working properly. p Remove the batteries, then install them again after about one minute and turn on the camera. If the functions still do not work, press the RESET button located on the bottom of the camera using a fine-tipped object, then turn the power on again (page 81). (If you press the RESET button, all settings including the date and time are cleared.) You cannot identify an indicator on the LCD screen. — p Check the indicator (pages 99 to 101). The lens gets fogged. • Moisture condensation has occurred. p Turn off the camera and leave for about an hour at the room temperature for the moisture to evaporate before use (page 94). Troubleshooting Warnings and messages The following messages appear on the LCD screen. Message Meaning/Corrective Action NO MEMORY STICK • Insert a “Memory Stick” (page 22). SYSTEM ERROR • Turn the power off and on again (page 19). MEMORY STICK ERROR • The inserted “Memory Stick” cannot be used in your camera (page 95). • The “Memory Stick” is damaged, or the terminal section of the “Memory Stick” is dirty. • Insert the “Memory Stick” correctly (page 22). FORMAT ERROR • The “Memory Stick” format failed. Format the “Memory Stick” again (page 55). MEMORY STICK LOCKED • The write-protect switch on the “Memory Stick” is set to the LOCK position. Set it to the recording position (page 95). NO MEMORY SPACE • The capacity of the “Memory Stick” is insufficient. You cannot record images. Delete unnecessary images (page 53). NO FILE • No images have been recorded on the “Memory Stick.” FILE ERROR • An error occurred while playing back the image. FOLDER ERROR • A folder with the same name already exists on the “Memory Stick.” INVALID OPERATION • You are playing back a file...
Эта инструкция также подходит к моделям:- ()