Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• Never remove the “Memory Stick Duo” when the access lamp is lit. The data may be corrupted. • When the [Default Media] is set to [Internal Memory] via the home screen, the images are recorded in the internal memory, although the “Memory Stick Duo” is being inserted (page 24). 2 Charging the battery pack v mark CHG lamp Power cord (mains lead) DC IN jack AC Adaptor 1Connect the cable of the AC Adaptor (supplied) to the DC IN jack of the Cyber-shot Station (supplied). 2Connect the power cord (mains lead) to the AC Adaptor and plug the adaptor into the wall outlet (wall socket). 3Attach the camera on the Cyber-shot Station. The CHG lamp lights on, and charging starts. When the CHG lamp turns off, charging is finished (Full charge). [ Charging time Battery pack Full charge time NP-FR1 Approx. 240 min. • Time required to charge a fully depleted battery pack (supplied) at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions. • For details on battery usable time, see page 33. • Even if the CHG lamp is not lit, the camera is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket). If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. • If you do not operate the camera for a long time, disconnect the AC Adaptor both from the DC IN jack of the Cyber-shot Station and from a wall outlet (wall socket). [ To check the remaining battery time Open the lens cover or press the POWER button to turn on and check the time on the LCD screen. When the remaining battery time is not indicated, switch the display by pressing the DISP (Screen display switch) button. DISP (Screen display switch) button Remaining indicator Remaining time LCD screen • It takes about one minute until the correct battery remaining time appears. • Only is indicated, depending on a mode. • The displayed time remaining may not be correct under certain circumstances. • When you turn on the power for the first time, the Clock Set screen appears (page 15). 3 Turning the camera on/setting the clock POWER button Control button OPEN (CAMERA) lever Lens cover 1 2 HOME button Up Down Left: Move the button to the LCD screen side. Right: Move the button to the lens side. Press z 3 5 4 1Press the POWER button or open the lens cover. 2Set the clock with the control button. 1 -1Select [Area], then press z. -2Select the desired area, then press z. 2 -1Select [Daylight Savings], then press z. -2Select [On] or [Off] of the daylight saving time, then press z. 3 -1Select [Date display order], then press z. -2Select the desired order, then press z. 4 -1Select each item and set the numeric value, then press z. -2Set up all the items. 5 Select [OK], then press z. [ To change the date and time Press the HOME button, and select [ Settings] t [ Clock Set] (page 25). [ When you turn on the power • If the camera is running on battery power and you do not operate the camera for about three minutes, the camera turns off automatically to prevent wearing down the battery pack (Auto power-off function). 4 Connecting the camera with your computer If you use the software contained in the CD-ROM (supplied), you can display images shot with the camera on the computer. For details, refer to “Cyber-shot Handbook.” (USB) jack CONNECT button Connect the USB cable to the (USB) jack of the Cyber-shot Station and the USB jack of a computer and then press the CONNECT button. Viewing “Cyber-shot Handbook” [ For Windows users [ For Macintosh users 1 Turn on your computer, and insert the CD-1 Turn on your computer, and insert the CDROM (supplied) into the CD-ROM drive. ROM (supplied) into the CD-ROM drive. The screen below appears. Select the “Handbook” folder and copy “Handbook.pdf” stored in the “GB” folder to your computer. 2 After copying is complete, double-click “Handbook.pdf.” When you click the [Cyber-shot Handbook] button, the screen for copying “Cyber-shot Handbook” appears. Follow the on-screen instructions to copy. 2 After the installation is complete, double- click the shortcut created on the desktop. Installing the software Supported Operating Systems for “Album Editor”, “Picture Motion Browser” Windows 2000 Professional (SP4 or later required), Windows XP Home Edition or Windows XP Professional • Must be installed with above OS at delivery. • The “Album Editor” and “Picture Motion Browser” are not compatible with Macintosh computers. • For further details on the operating environment of “Album Editor” and “Picture Motion Browser,” refer to “Cyber-shot Handbook.” 1 Turn on your computer, and insert the CD ROM (supplied) into the CD-ROM drive. The screen below appears. When you click the [Install] button, the “Choose Setup Language” screen appears. 2 Follow the instructions on the screen to complete the installation...