Оценок - 0, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• You cannot turn off the LCD screen when [DEMO] is set to [ON] in the menu settings. Checking the last recorded image (Quick Review) You can check the last recorded image by clearing the menu bar from the screen (page 33) and pressing b on the control button. To return to the normal recording mode, press lightly on the shutter button or select [RETURN] with b/B on the control button and then press the center z. You can also delete the image first by selecting [DELETE] on the Quick Review screen with b/B on the control button and pressing the center z, and then selecting [OK] with v/V on the control button and pressing the center z. B BBBB Recording 17 Using the zoom feature The lens portion moves during zoom operation. Be careful not to touch the lens portion while it is operating. T side: for telephoto (subject appears closer) Zoom button W side: for wide-angle (subject appears farther away) Minimum focal distance to the subject W side: About 19 3/4 inches (50 cm) or more T side: About 19 3/4 inches (50 cm) or more To record even closer subjects, see page 43. Digital zoom function This camera has a digital zoom function. Digital zoom enlarges the image by digital processing and it starts to function when zoom exceeds 3.. The T side of the bar shows the digital zooming zone. Using digital zoom • The maximum zoom magnification is 6.. • Digital zooming deteriorates the picture quality. When digital zoom is not necessary, set [DIGITAL ZOOM] to [OFF] in the menu settings (page 37). Notes • Zoom does not work while recording moving images. • Digital zoom does not work for moving images. • Digitally zoomed images do not appear in the finder. Check these images using the LCD screen. LCD screen indicators during recording Press DISPLAY to turn on/off the indicators on the LCD screen. See page 67 for a detailed description of the indicated items. DISPLAY Notes • You cannot turn off the self-timer indicators and some of the indicators used in advanced operations. • The indicators on the LCD screen are not recorded. Using the self-timer When you use the self-timer function, the subject is recorded about 10 seconds after you press the shutter button. Shutter button Self-timer lamp Control button Select (self-timer) indicator on the menu bar with v/V/b/B on the control button, then press the center z. The (self-timer) indicator appears on the LCD screen, and about 10 seconds after you press the shutter button, the subject is recorded. The self- timer lamp flashes after you press the shutter button until the shutter is released. B BBBB Recording 19 Recording images with the flash The initial setting is auto (no indicator). In this mode, the flash automatically strobes when the surroundings become dark. When you change the flash mode, press the (flash) repeatedly so that the flash mode indicator appears on the LCD screen. (flash) Each time you press the (flash), the indicator changes as follows. (No indicator) t t t t (No indicator) Auto red-eye reduction: The flash strobes before recording to reduce the red-eye phenomenon. Forced flash: The flash strobes regardless of the surrounding brightness. No flash: The flash does not strobe. You can change the brightness of the flash (FLASH LEVEL) in the menu settings (page 37). Notes • The recommended shooting distance using the built-in flash is 1 5/8 feet to 7 1/2 feet (0.5 m to 2.3 m) when set to the W side, or 1 5/8 feet to 3 7/8 feet (0.5 m to 1.2 m) when set to the T side. • Auto red-eye reduction may not produce the desired red-eye reduction effects depending on individual differences, the distance to the subject, if the subject does not see the pre-strobe, or other conditions. • The flash effect is not obtained easily when you use forced flash in a bright location. • When you record images in a dark place with the camera set to (no flash), the shutter speed becomes slow, so using a tripod is recommended to prevent shaking. Recording moving images Moving images with audio are recorded in MPEG format. To record moving images, slide the POWER switch to turn on the power and insert a “Memory Stick.” POWER switch DISPLAY 1 Set the MODE selector to MOVIE. 2 Press the shutter button fully down. “REC” appears on the LCD screen, and the image and sound are recorded on the “Memory Stick.” If you press the shutter button once The image and sound are recorded for five seconds. You can change the recording time to 10 or 15 seconds with [REC TIME SET] in the menu settings (page 36). If you hold the shutter button down The image and sound are recorded while the shutter button is held down for up to 60 seconds. However, when [IMAGE SIZE] in the menu setting is set to [320 (HQ)]/[320.240], the maximum recording time is 15 seconds (page 36). Zooming or using the self-timer, etc. See pages 18 and 19. LCD screen indicators during recording Press DISPLAY to turn on/off the indicators on the LCD screen. These indicators are not recorded. See page 67 for a detailed description of the indicator...