Оценок - 5, средний балл: 4.2
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Refer to “User’s Guide/Troubleshooting” (separate volume) Explains advanced techniques and what to do if you experience trouble with your camera. DSC-P200 Checking the accessories supplied • AC-LS5/LS5B AC Adaptor (1) • Battery case (1) • “Memory Stick” (32 MB) (1) • Power cord (mains lead) (1) • USB, A/V cable for multiuse terminal (1) • CD-ROM (Cyber-shot application software) (1) • Operating instructions for digital still camera “Read This First” (this manual) (1) • Operating instructions “User’s Guide/ Troubleshooting” (1) • NP-FR1 battery pack (1) • Wrist strap (1) Notes before use • Charge the supplied battery pack before using the camera for the first time. • The camera is a precision instrument. Be careful not to bump the lens or the LCD screen, and not to apply force to it. Attach the strap to prevent the camera from damage by being dropped, etc. Additional information on this product and answers to frequently asked questions can be found at our Customer Support Website. Hook Charge the battery pack Be sure to turn off your camera before charging starts. Charging indicator Light on: Charging Light off: Completed (Disconnect the AC Adaptor.) • It takes approximately 200 minutes to charge a completely discharged battery pack using the AC Adaptor at a temperature of 25°C (77°F). Charging may take longer under certain circumstances or conditions. • The indicator also lights up while charging the flash. 1 Install the battery pack. Slide down to open Make sure that the battery pack is faced correctly. Align v at the bottom. Close 1 Bottom AC Adaptor v mark 2 Open the cover, and pull it out. Connect the plug to the DC IN jack. 3 To wall outlet (wall socket) Power cord (mains lead) Using the AC Adaptor Use the camera connected to a wall outlet (wall socket) as illustrated above. • Connect the AC Adaptor to an easily accessible wall outlet (wall socket). If any trouble occurs, immediately disconnect the plug from the wall outlet (wall socket). • After use, disconnect the AC Adaptor both from the camera and from the wall outlet (wall socket). • This set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket) even if the set itself has been turned off. • Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture. To check the remaining battery time Press POWER to turn on and check the time on the LCD screen. To remove the battery pack Open the cover and slide the battery eject lever in the direction of the arrow. Be careful not to drop the battery pack. To use your camera abroad — Power sources You can use your camera and the AC Adaptor (supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b]. • It takes about one minute until the correct battery remaining time appears. • The displayed time remaining may not be correct under certain circumstances. • Do not use an electronic transformer (travel converter), as this may cause a malfunction. 60min Remaining indicator Remaining time Battery eject lever AC-LS5/LS5B Turn the camera on/set the clock 2 1 Select . 2 Press POWER. POWER 2005 / 1 / 1 12 : 00 AM OK Cancel Clock Set D/M/Y M/D/Y Y/M/D Lighting 3 Set the clock with the control button. 1 Select the date display format with v/V, then press z. 2 Select each item with b/B and set the numeric value with v/V, then press z. 3 Select [OK] with B, then press z. • To cancel, select [Cancel] and press z. 2005 / 1 / 1 12 : 00 AM OK Cancel Clock Set D/M/Y M/D/Y Y/M/D 2005 / 1 / 1 12 : 00 AM OK Cancel Clock Set D/M/Y M/D/Y Y/M/D 2005 / 1 / 1 10 : 30 AM OK Cancel Clock Set D/M/Y M/D/Y Y/M/D To change the date and time Select [Clock Set] in the (Setup) screen and perform the procedure in step 3 above. t “User’s Guide/Troubleshooting” (page 52) On the clock display • If you selected [D/M/Y] in step 3-1, set the time on a 24-hour cycle. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. When turning on the power • Unless you set the clock, the Clock Set screen appears each time the camera is turned on. • Do not touch the lens portion as the cover opens and the lens portion extends. Also, do not leave the camera with the lens portion extended for a long period of time with the power off as this may cause malfunction. • The following screen appears when the camera is turned on for the second time or afterwards. To turn off the power Press POWER again. • If the camera is running on battery power and you do not operate the camera for a period of time, the camera turns off automatically to prevent wearing down the battery (Auto power-off function). Changing the language setting You can change the screen display to show messages in a specified language. To change the language setting, press MENU to display the menu screen. Select (Setup) with the control b...