Оценок - 3, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
d Select (Divide) with B, then press z. Next, select [OK] with v, then press z. The playback of the movie starts. e Decide on a cutting point. Press z at the desired cutting point. 00:00:02 60min 10/10101 STD 6 40 Divide Dividing Point O K Cancel Exit When you want to adjust the cutting point, use [c/C] (frame forward/ rewind) and adjust the cutting point using b/B. If you want to change the cutting point, select [Cancel]. The playback of the movie starts again. f When you have decided on a cutting point, select [OK] with v/V, and press z. g Select [OK] with v, then press z. The movie is cut. To cancel cutting Select [Exit] in step 5 or 7. The movie appears on the LCD screen again. • You cannot cut the following images. – Still images – Movie files not long enough to cut – Protected movie files • You cannot restore files once you cut them. • The original movie is deleted when you cut it. • The cut movies are recorded as the newest files in the selected recording folder. Deleting unnecessary portions of movies a Cut an unnecessary portion of a movie (page 74). b Display the portion of the movie you want to delete. c Press (Delete). The movie has not yet been deleted at this point. d Select [Delete] with v, then press z. The movie currently displayed on the LCD screen is deleted. • Note that you cannot restore deleted portions of movies. Copying images to your computer — For Windows users Recommended computer environment OS: Microsoft Windows 98, Windows 98SE, Windows 2000 Professional, Windows Millennium Edition, Windows XP Home Edition or Windows XP Professional The above OS must be installed at the factory. Operation is not assured in an environment upgraded to the operating systems described above or in a multi-boot environment. CPU: MMX Pentium 200 MHz or faster USB connector: Provided as standard Display: 800 . 600 dots or more High Color (16-bit color, 65,000 colors) or more • This camera conforms to USB 2.0. • Use with a USB 2.0 (High-Speed USB) compatible computer environment allows high- speed data transfer. • If you connect two or more USB equipment to a single computer at the same time, some equipment, including your camera, may not operate depending on the type of USB equipment. • Operations are not guaranteed when using a USB hub. • Operations are not guaranteed for all the recommended computer environments mentioned above. USB mode There are two modes for connecting to a computer, [Normal] and [PTP]* modes. The factory setting is the [Normal] mode. This section describes the [Normal] mode as an example. * Compatible only with Windows XP. When connected to a computer, only the data in the folder selected by the camera is copied to the computer. To select a folder, perform the procedure on page 60. Communication with your computer When your computer resumes from the suspend or sleep mode, communication between your camera and your computer may not recover at the same time. When a USB connector is not provided on your computer When neither a USB connector nor a “Memory Stick” slot is provided, you can copy images using an additional device. See the Sony Website for details. Contents of the CD-ROM x USB Driver This driver is needed in order to connect the camera to a computer. • When using Windows XP, you need not install the USB driver. x Image Transfer This application is used to easily transfer images from the camera to a computer. x ImageMixer This application is used to display and edit images that are stored in a computer. • The required operations may differ depending on your OS. • Close down all applications running on the computer before installing the USB driver and application. • When using Windows XP or Windows 2000, log on as Administrators. • The display settings should be 800 . 600 dots or more and High Color (16-bit color, 65,000 colors) or more. When set to less than 800 . 600 dots or 256 colors or less, the model selection screen does not appear. Enjoying images on computer Installing the USB driver When using Windows XP, you need not install the USB driver. Once the USB driver is installed, you need not install the USB driver again. a Start up your computer, and insert the CD-ROM (supplied) into the CD-ROM drive. Do not connect your camera to your computer at this time. The model selection screen appears. If it does not appear, double-click (My Computer) t (ImageMixer) in that order. b Click [Cyber-shot] on the model selection screen. The installing menu screen appears. c Click [USB Driver] on the installing menu screen. The “InstallShield Wizard” screen appears. d Click [Next]. When the “Information” screen appears, click [Next]. The USB driver installation starts. When the installation is completed, the screen informs you of completion. e Click [Yes, I want to restart my computer now], then click [Finish]. Your computer restarts. Then, you can establish USB connection. Installing “Image Transfer” You can use the “Image Transfer” software to copy images to y...