Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Note that formatting irrevocably erases all data on a “Memory Stick Duo”, including even protected images (page 51). Create REC. Folder OK / Cancel Creates a folder for recording images (page 55). Change REC. Folder OK / Cancel Changes a folder for recording images (page 56). 1 (Setup 1) Item Setting Description LCD Backlight Bright / Normal Selects the brightness of the LCD backlight. Selecting [Bright] makes the screen bright and easy to see when using the camera outdoors or in other bright locations, but also uses up the battery charge faster. Displayed only when you are using the camera with the battery pack. Beep Shutter . Turns on the shutter sound when you press the shutter button. On . Turns on the beep/shutter sound when you press the control button/press the shutter button. Off . Turns off the beep/shutter sound. Language — Displays the menu items, warnings and messages in selected language. 2 (Setup 2) Item Setting Description File Number Series . Assigns numbers to files in sequence even if the “Memory Stick Duo” is changed or the recording folder is changed. Reset . Resets the file numbering and starts from 0001 each time the folder is changed. (When the recording folder contains a file, a number one higher than the largest number is assigned.) USB Connect PictBridge . Connects the camera with a PictBridge compatible printer (page 78). PTP . When a PTP connection is made, the Copy Wizard automatically starts up and copies the images in the recording folder (page 95) set in the camera to the computer. (This supports Windows XP and Mac OS X.) Normal . Makes a USB connection between the camera and a computer (pages 91 and 103). Video Out NTSC . Sets the video output signal to NTSC mode (e.g., USA, Japan). PAL . Sets the video output signal to PAL mode (e.g., Europe). Clock Set OK / Cancel Sets the date and time (pages 21 and 54). Precautions Do not leave the camera in the following places • In extremely hot place, such as in a car parked in the sun. The camera body may become deformed or this may cause a malfunction. • Under direct sunlight or near a heater. The camera body may become discolored or deformed, or this may cause a malfunction. • On rocking vibration • Near strong magnetic place • In sandy or dusty places, be careful not to let sand or dust get into the camera. This may cause the camera to malfunction, and in some cases this malfunction cannot be repaired. On carrying Do not sit down in a chair or other place with the camera in the back pocket of your trousers or skirt, as this may cause malfunction or damage the camera. On cleaning Cleaning the LCD screen Wipe the screen surface with an LCD cleaning kit (not supplied) to remove fingerprints, dust, etc. Cleaning the lens Wipe the lens with a soft cloth to remove fingerprints, dust, etc. Cleaning the DC plug Clean the DC plug of the AC Adaptor with a dry cotton bud. Do not use the dirty plug. Use of the dirty plug may not properly charge the battery pack. Cleaning the camera surface Clean the camera surface with a soft cloth slightly moistened with water, then wipe the surface with a dry cloth. Do not use the following as this may damage the finish or the casing. . Chemical products such as thinner, benzine, alcohol, disposable cloth, insect repellent or insecticide, etc. . Touch the camera with the above on your hand . Contact with rubber or vinyl for a long time On operating temperature Your camera is designed for use between the temperatures of 0°C and 40°C (32°F and 104°F). Shooting in extremely cold or hot places that exceed this range is not recommended. On moisture condensation If the camera is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense inside or outside the camera. This moisture condensation may cause a malfunction of the camera. Moisture condensation occurs easily when: • The camera is brought from a cold location such as a ski slope into a warmly heated room • The camera is taken from an air- conditioned room or car interior to the hot outdoors, etc. How to prevent moisture condensation When bringing the camera from a cold place to a warm place, seal the camera in a plastic bag and allow it to adapt to conditions at the new location over a period of time (about an hour). If moisture condensation occurs Turn off the camera and wait about an hour for the moisture to evaporate. Note that if you attempt to shoot with moisture remaining inside the lens, you will be unable to record clear images. On internal rechargeable button battery This camera has an internal rechargeable button battery for maintaining the date and time and other settings regardless of whether the power is on or off. This rechargeable button battery is continually charged as long as you are using the camera. However, if you use the camera for only short periods it discharges gradually, and if you do not use the camera at all for about one month it becomes completely discharged. In this case, be sure ...