Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ( 1) This device may not cause harmful interference, and ( 2) this device must accept any interference received, including interference that may cause undesired operation. Responsible Party: Panasonic Corporation of North America One Panasonic Way Secaucus, NJ 07094 Support Contact: Panasonic Consumer Electronics Company Telephone No.: 1- 800- 211- PANA ( 7262) VQT2G22 Precautions Precautions . Lens Care . Sand and dust can damage the lens. Make sure that no sand or dust gets inside the lens or the terminals when using the lens on a beach, etc. . This lens is not waterproof. If drops of water get onto the lens, wipe the lens with a dry cloth. . Do not press the lens with excessive force. . When there is dirt ( water, oil, and fingerprints, etc. ) on the surface of the lens, the picture may be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking pictures. . Do not place the lens mount facing downwards. Do not allow the lens contact point 1 to become dirty. . About Condensation ( Fogging of the Lens) . Condensation occurs when there are differences in temperature and humidity as described below. Condensation can cause the lens to become dirty and lead to mold and malfunctioning, so exercise caution in the following situations: – When the camera is brought indoors from outside during cold weather – When the camera is brought into an air- conditioned car – When cold air from an air conditioner is directly blown onto the lens – In humid places . Put the camera into a plastic bag to allow it to acclimatize to the surrounding temperature in order to prevent condensation. If condensation occurs, turn the power off and leave it for about two hours. Once the camera acclimatizes to the surrounding temperature the condensation will go away naturally. VQT2G22 Supplied Accessories [ Inspection to be performed when you unpack the unit] When removing the unit from its packing box, check that the main unit and the supplied accessories are there and also check their external appearance and functions to verify that they have not sustained any damage during distribution and transportation. If you discover any trouble, contact your vendor before using the product. Product numbers correct as of September 2009. These may be subject to change. VFC4460 1 VFC4315 2 VYF3260 3 1 Lens Storage Bag 2 Lens Rear Cap ( The lens rear cap and lens cap are attached to the interchangeable lens at the time of purchase. ) 3 Lens Cap 6 VQT2G22 Attaching/ Detaching the Lens . Refer also to the camera’s operating instructions for attaching and detaching the lens. . Attaching the Lens . Check that the camera is turned off. 1 Turn the lens rear cap to detach it. A: Lens Rear Cap . 2 Align the lens fittingmarks B (red marks) on the camera body and the lens and then rotate the lens in the direction of the arrow until it clicks. • Do not press the lens release button when you attach a lens. • Do not try to attach the lens when holding it at an angle to the camera body as the lens mount may get scratched. • Check that the lens is attached correctly. . Detaching the Lens . Check that the camera is turned off. Press the lens release button C while turning the lens as far as possible in the direction of the arrow to detach it. • Attach the lens rear cap so that the lens contact point does not get scratched. . • Attach the body cap to the camera so no dirt or dust will get inside the main unit. . Attaching and Detaching the Lens Cap . Be careful not to lose the lens cap. . Attaching Filters . Vignetting may occur if using 2 or more MC protectors ( optional: DMW- LMC46) , PL filters ( optional: DMW- LPL46) or ND filters ( optional: DMW- LND46) , or if using thick protectors and/ or filters. . The filter may become impossible to remove if excessively tightened, so please refrain from tightening it too strongly. . It is possible to attach the lens cap with the filter already attached. . If you have problems with the attachment or removal of the PL filter ( optional: DMW-LPL46) , we recommend turning on the digital camera and trying again with the focus mode set to “ manual” ([ MF] ). . Accessories other than filters, such as conversion lenses or adaptors, cannot be mounted on this lens. It may interfere with the focus operation or damage the lens. VQT2G22 1 Lens surface Names and Functions of Components . Lens 12 3 2 Focus ring Rotate to focus when taking pictures with manual focus. 3 Contact point 4 Lens fitting mark This lens uses a lens drive system to enable a compact and bright F1.7. As a result of this, there are operating sounds and vibrations when focusing, but this is not a malfunction. Operating sounds are recorded when auto- focusing during motion picture recording. If operating sounds become ...